AeroShell Fluid 3 Shell
AeroShell Fluid 3 :
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.
Main Applications Of Shell AeroShell Fluid 3
- AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints,
shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as ‘an oilcan lubricant’. - Operating temperature range of AeroShell Fluid 3 is -540C
to +1210C. - For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell
Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
Specifications, Approvals & Recommendations Of AeroShell Fluid 3
- MIL-PRF-7870E
- DEF STAN 91-47 (Obsolete)
- NATO Code O-142
- Joint Service Designation OM-12 (Obsolete)
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics Of AeroShell Fluid 3
| Properties | Method | MIL-PRF-7870E | Typical | ||
|---|---|---|---|---|---|
| Oil type | Mineral | ||||
| Colour | ASTM D1500 | <0.5 | |||
| Density | @150C | kg/m3 | ASTM D4052 | 890 | |
| Kinematic Viscosity | @380C | mm2/s | ASTM D445 | 10 min | 10 |
| Kinematic Viscosity | @-400C | mm2/s | ASTM D445 | 4 000 max | <4 000 |
| Flash Point (Cleveland Open Cup) | 0C | ASTM D92 | 130 min | 155 | |
| Pour Point | 0C | ASTM D97 | -57 max | <-57 | |
| Evaporation Loss | 22h @ | %m | ASTM D972 | 25 max | 19 |
| 990C | |||||
| Total Acid Number | mg KOH/g | ASTM D664 | Report | 0.68 | |
| Low temperature stability 72 hrs | @-540C | FED-STD-791- 3458 | Must pass | Passes | |
| Corrosion and oxidation stability 168 hrs - metal weight change | @1210C | ASTM D4636 | Must pass | Passes | |
| Corrosion and oxidation stability 168 hrs - viscosity change at 37.80C | @1210C % | ASTM D4636 | -5 to +20 max | 10 | |
| Corrosion and oxidation stability 168 hrs - acid number change | @1210C mgKOH/g | ASTM D4636 | 0.2 max | 0.06 | |
| Corrosivity | ASTM D6547 | Must pass | Passes | ||
| Precipitation number | ml | ASTM D91 | 0 max | Passes |
If you wish to buy AeroShell Fluid 3 of Shell from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
AeroShell Fluid 3, Shell in India
We can give you the best cost prices to buy AeroShell Fluid 3 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Synthetic Lubricating Oil for General Purpose Aircraft Use AeroShell Fluid 3, Shell in India
We can also ship AeroShell Fluid 3 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.
