AeroShell Oil 100 Shell
AeroShell Oil 100 :
AeroShell straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant.
Main Applications Of Shell AeroShell Oil 100
- AeroShell Oils are available in four different viscosity grades:
AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. - The suffix for each grade corresponds to the viscosity of
the oil at 2100F in Saybolt Universal Seconds. - The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified
aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
Specifications, Approvals & Recommendations Of Shell AeroShell Oil 100
- The U.S. Specification SAE J-1966 replaces MIL-L-6082E.
- Although it was planned to replace the British Specification
DERD 2472 with a DEF STAN specification this has now
been put into abeyance and instead the SAE specification has been adopted. - U.S. : Approved J-1966 SAE Grade 50
- British : Approved J-1966 SAE Grade 50
- French : (AIR 3560/D Grade SAE 50)
- Russian : MS-20
- NATO Code : O-117 Obsolete
- Joint Service Designation : OM-270
( ) indicates the product is equivalent to specification.
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics Of AeroShell Oil 100
| Properties | Method | Typical | ||
|---|---|---|---|---|
| SAE Viscosity grade | 50 | |||
| Colour | ASTM D1500 | 5 | ||
| Density | @150C | kg/l | ASTM D1298 | 0.886 |
| Kinematic viscosity | @400C | mm2/s | ASTM D445 | 230 |
| Kinematic viscosity | @1000C | mm2/s | ASTM D445 | 19.7 |
| Viscosity Index | ASTM D2270 | Above 94 | ||
| Pourpoint | 0C | ASTM D97 | Below -17 | |
| Flashpoint Cleveland Open Cup | 0C | ASTM D92 | Above 250 | |
| Total acidity | mgKOH/g | ASTM D664 | <0.1 | |
| Sulphur | % m | ASTM D129 | 0.48 | |
| Copper corrosion | @1000C | ASTM D130 | 1b | |
| Ash content | % m | ASTM D482 | 0.006 |
If you wish to buy AeroShell Oil 100 of Shell from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
AeroShell Oil 100, Shell in India
We can give you the best cost prices to buy AeroShell Oil 100 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Straight Mineral Oil AeroShell Oil 100, Shell in India
We can also ship AeroShell Oil 100 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
