AeroShell Turbine Oil 390 Shell
AeroShell Turbine Oil 390 :
AeroShell Turbine Oil 390 is a 3 mm2/s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermaland oxidation stabilityand to increase the load carrying abilityof the base oil.
Main Applications Of Shell AeroShell Turbine Oil 390
- AeroShell Turbine Oil 390 was developed primarily as an improved 3 mm2/s oil for British turbo-jet engines. AeroShell
Turbine Oil 390 is fully approved for a wide range of turbine engines.
More recently, because of the low temperature characteristics of AeroShell Turbine Oil 390, there is interest in using this oil in auxiliary power units (APU) in order to overcome the effects of cold soak. Normal practice is to shut down the APU during cruise, the APU then experiences cold soak, often prolonged, and when the unit is started there is considerable difficulty resulting in the unit not coming up to speed in the given time, thus causing a hung start.
In such cases where the APU is subject to a long cold soak the viscosity of standard 5 mm2/s oils used in the APU will increase from 5 mm2/s at 1000C to typically 10,000 mm2/s at
–400C. At this much higher viscosity the oil cannot flow easily leading to a large viscous drag within the APU, thereby contributing to the difficulty in starting. AeroShell Turbine Oil 390 on the other hand experiences a much smaller viscosity increase (typically 2000 mm2/s at –400C) with a reduction in viscous drag which is often sufficient to overcome hung start problems.
All experience to date shows a considerable improvement in cold reliability of the APU when AeroShell Turbine Oil 390 is used.
Specifications, Approvals & Recommendations Of AeroShell Turbine Oil 390
- Approved DEF STAN 91-94 (British)
- Analogue to IPM -10, VNII NP 50-1 4f and 4u, and 36Ku-A
(Russian) - Joint Service Designation OX-7
- Honeywell : GTCP 30, 36, 70, 85, 331 and 660 APUs Starters,
Turbo Compressors - Pratt & Whitney Canada : PW901A APU
- Rolls Royce : Conway, Spey, Tay, M45H
- Turbomeca : Astazou, Artouste, Bastan VII, Marbore 6, Makila,
Turmo - Hamilton-Sundstrand: APS 500, 1000, 2000, 3000
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics Of AeroShell Turbine Oil 390
| Properties | DEF STAN 91-94 | Typical | ||
|---|---|---|---|---|
| Oil type | - | Synthetic ester | ||
| Density | @150C | kg/l | - | 0.924 |
| Kinematic viscosity | @400C | mm2/s | 16.0 max | 12.9 |
| Kinematic viscosity | @1000C | mm2/s | 4.0 min | 3.4 |
| Kinematic viscosity | @-540C | mm2/s | 13000 max | <13000 |
| Pourpoint | 0C | -60 max | -68 | |
| Flashpoint Cleveland Open Cup | 0C | 225 min | 225 | |
| Foam characteristics | Must pass | Passes | ||
| Trace element content | Must pass | Passes | ||
| Elastomer compatibiity - nitrile % | 14 to 26 | Within range |
If you wish to buy AeroShell Turbine Oil 390 of Shell from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
AeroShell Turbine Oil 390, Shell in India
We can give you the best cost prices to buy AeroShell Turbine Oil 390 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
3 mm2/s Synthetic Ester Oil AeroShell Turbine Oil 390, Shell in India
We can also ship AeroShell Turbine Oil 390 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.
