Aircol MR 46 Castrol
Aircol MR 46 :
The Castrol Aircol MR compressor oil range of premium lubricants are formulated from highly refined mineral oils and novel additive technology to give outstanding antiwear and antirust performance to meet the requirements of Atlas Copco and similar types of compressor design.
Application Of Castrol Aircol MR 46
Aircol MR incorporates a carefully balanced antioxidant system providing improved oxidative and thermal stability giving “extended” service life for both oil flooded and oil injected rotary screw compressors operating continuously at air discharge temperatures up to 90ºC. The product has been designed to meet service drain intervals of 4000 hours. For intermittent or continuous operation with air discharge temperatures above 90ºC the manufacturers’ standard oil change periods should be used.
The Aircol MR range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol MR is classified as follows:
- ISO 6743-3 Compressor Oils
- DAG and DAH for rotary air compressors
Aircol MR grades meet the requirements of:
- Atlas Copco for 4000 hour oil life
Advantages Of Aircol MR 46
- Very low deposit forming tendencies extends oil change intervals and air filter life which contributes to a reduction in maintenance costs.
- Good air/oil separation properties at the separator element reduces risk of oil carry over.
- Good antiwear protection reduces rotor wear.
- Excellent water separation characteristics allows condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
- Excellent oxidation and thermal stability minimises oil thickening and extends the oil separator life and reduces fouling of coolers & pipes.
- Prevents corrosion when operating under humid conditions.
Typical Characteristics Of Aircol MR 46
Name | Method | Units | MR 46 | MR 68 |
---|---|---|---|---|
Appearance | Visual | - | Clear & Bright | Clear & Bright |
ISO ViscosityGrade | - | - | 46 | 68 |
Density @ 15°C / 59°F | ASTM D4052 | kg/m³ | 880 | 880 |
Kinematic Viscosity @ 40°C / 104°F | ASTM D445 | mm²/s | 46 | 68 |
Kinematic Viscosity @ 100°C / 212°F | ASTM D445 | mm²/s | 6.7 | 8.6 |
Viscosity Index | ASTM D2270 | - | >95 | >95 |
Foam Sequence I - tendency / stability | ASTM D892 | ml/ml | 30/0 | 30/0 |
Pour Point | ASTM D97 | °C | -21 | -21 |
Flash Point, PMCC | ASTM D93 | °C | >195 | >195 |
Rust test - synthetic seawater (24 hrs) | ASTM D665B | - | Pass | Pass |
Water Separation @ 54°C / 129°F (40/37/3) | ASTM D1401 | min | 15 | 15 |
Oxidation Stability - Rotating Pressure Vessel test | ASTM D2272 | min | 700 | 700 |
If you wish to buy Aircol MR 46 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Aircol MR 46, Castrol in India
We can give you the best cost prices to buy Aircol MR 46compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Rotary Screw Compressor Lubricant Aircol MR 46, Castrol in India
We can also ship Aircol MR 46 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.