Aircol PD 150 Castrol

Aircol PD 150 :

Castrol Aircol PD oils are a range of compressor lubricants, based upon highly refined mineral oils, which are intended   for the lubrication of both reciprocating and rotary air compressors.

Application Of Castrol Aircol PD 150

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in   screw type compressors is defined by a maximum air discharge temperature =/< 100?C as defined by ISO 6743-3:2003.

Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743.
Normal duty is described as:-

  • discharge temperatures =/< 165?C
  • differential pressures =/< 2.5 MPa (25 bar)
  • discharge pressures =/< 7.0 MPa (70 bar).

Severe Duty is described as:-

  • discharge temperatures > 165?C
  • differential pressures > 2.5 MPa (25 bar)
  • discharge pressures > 7.0 MPa (70 bar)

Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220?C.
Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures.

The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Aircol PD is classified as follows:

  • DIN 51506 classification - VDL
  • ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors

Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

Advantages Of Aircol PD 150

  • Good water separation characteristics allows condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to a longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.
Additional Information Of Aircol PD 150

Castrol Aircol PD compressor oils are available in a wide range of viscosities, to suit different types of compressors  operating in varying ambient temperatures. Selection of the required viscosity grade should be based upon the     compressor manufacturers recommendations for the appropriate ambient temperature range,  which  will  have  been chosen to provide the best compromise between maintaining a fluid film between the working surface and minimising the amount of power absorbed by fluid friction in this oil film

Typical Characteristics Of Aircol PD 150
Name Method Units 32 46 68 100 150
Density @ 15°C / 59°F ISO 12185 / ASTM D4052 kg/m³ 870 880 880 890 890
Kinematic Viscosity @ 40°C / 104°F ISO 3104 / ASTM D445 mm²/s 32 46 68 100 150
Kinematic Viscosity @ 100°C / 212°F ISO 3104 / ASTM D445 mm²/s 5.6 6.7 8.6 11.4 14.5
Viscosity Index ISO 2909 / ASTM D2270 - 110 100 100 98 98
Foam Sequence I - tendency / stability ISO 6247 / ASTM D892 ml/ml 30/0 30/0 30/0 30/0 30/0
Flash Point - open cup method ISO 2592 / ASTM D92 °C/°F 226/ 232/ 232/ 253/ 256/
439 450 450 487 493
Pour Point ISO 3016 / ASTM D97 °C/°F 3.5 3.5 3.5 -1.2 -0.5625
Water Separation @ 54°C / 129°F (40/37/3) ISO 6614 / ASTM D1401 min 15 15 15 - -
Water Separation @ 82°C / 180°F (40/37/3) ISO 6614 / ASTM D1401 min - - - 20 20
Rust test - synthetic seawater (24 hrs) ISO 7120 / ASTM D665B - Pass Pass Pass Pass Pass
Carbon residue - Conradson test - after air ageing DIN 51352-2 %wt 0.7 0.7 0.7 <3.0 <3.0
Oxidation Stability - Rotating Pressure Vessel test ASTM D2272 / IP 229 min 270 270 270 - -

If you wish to buy Aircol PD 150 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.

Aircol PD 150, Castrol in India
We can give you the best cost prices to buy Aircol PD 150compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

Air Compressor Lubricants Aircol PD 150, Castrol in India
We can also ship Aircol PD 150 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card