Alphasyn PG 220 Castrol

Alphasyn PG 220 :

The Castrol Alphasyn PG gear oil range of synthetic lubricants are based on polyalkyleneglycol (PAG) fluids enhanced with antioxidants, rust inhibitors and Extreme Pressure (EP) additives of high thermal stability.

Application Of Castrol Alphasyn PG 220

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of   the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn   PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Advantages Of Alphasyn PG 220

  • Low coefficient of friction reduces energy consumption and lowers operating temperatures, this leads to longer oil life.
  • Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products.
  • Inherently high VI makes the product suitable for operations over a wide temperature range.
  • High load carrying capacity and good wear protection reduces maintenance.
Additional Information Of Alphasyn PG 220

Normal industrial paints are not compatible with these lubricants. Gearboxes should be left unpainted internally, or alternatively should be painted with two component coatings such as epoxy resins. Care must be taken that seal materials are compatible with these lubricants. The recommended materials are nitrile rubber (NBR), silicone (VMQ), fluoro-silicone rubber (FMQ), and fluoroelastomers (FKM). Incompatible materials are likely to shrink or swell, thus causing either severe leakage or seizure of the seal. These products are not miscible with mineral oils.

Typical Characteristics Of Alphasyn PG 220
Name Method Unit PG 150 PG 220 PG 320 PG 460
Density @ 15°C / 59°F ISO 12185 / ASTM D4052 kg/m³ 1050 1060 1060 1060
Kinematic Viscosity @ 40°C / 104°F ISO 3104 / ASTM D 445 mm²/s 150 220 320 460
Kinematic Viscosity @ 100°C / 212°F ISO 3104 / ASTM D 445 mm²/s 28 40 56 80
Viscosity Index ISO 2909 / ASTM D2270 - 225 235 240 255
Pour Point ISO 3016 / ASTM D97 °C/°F 1.020942408 1.020942408 1.097560976 1.097560976
Flash Point - closed cup method ISO 2719 / ASTM D93 °C/°F 210/410 210/410 210/410 210/410
Foam Sequence I - tendency / stability ISO 6247 / ASTM D892 ml/ml Oct-00 Oct-00 Oct-00 Oct-00
Rust test - distilled water (24 hrs) ISO 7120 / ASTM D665A - Pass Pass Pass Pass
Timken OK Load test ASTM D2782 kg/lb 29.5/65 31.8/70 36.3/80 38.6/85
FZG Gear Scuffing test - A/8.3/90 ISO 14635-1 Failure Load Stage - - >12 >12

If you wish to buy Alphasyn PG 220 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.

Alphasyn PG 220, Castrol in India
We can give you the best cost prices to buy Alphasyn PG 220compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

Synthetic Gear Oils Alphasyn PG 220, Castrol in India
We can also ship Alphasyn PG 220 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card