DTE 10 Excel 32 Mobil

DTE 10 Excel 32 Mobil

DTE 10 Excel 32 :

Mobil DTE 10 Excel Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.

The Mobil DTE 10 Excel Series is constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications.  The products exhibit outstanding oxidation and thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high pressure, high output pumps.  The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems.  The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency and component protection at both low and high temperatures.  Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage and micro dieseling.  The carefully selected base oil and additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) and the zinc free anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation.

Formulated with extensive laboratory and in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil hydraulic oils.  This can translate to reduced power consumption or increased machine output, resulting in monetary savings.

In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.

In additional laboratory and in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness and component protection.  Mobil DTE 10 Excel also demonstrated the value of its high viscosity index and outstanding shear stability by operating successfully in temperatures as low as -34°C and by maintaining ISO viscosity grade.

Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against competitive products.  At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat generation and the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.

Energy efficiency explained
The energy efficiency design is a trademark of Exxon Mobil Corporation. Energy efficiency relates solely to the fluid performance when compared with ExxonMobil's standard hydraulic fluids. The technology used allows up to 6 percent increase in hydraulic pump efficiency compared with Mobil DTE 20 Series when tested in standard hydraulic applications. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with applicable industry standards and protocols. Efficiency improvements will vary based on operating conditions and applications to GLXX Content Report for Mobil DTE 10 Excel Series.

Features and Benefits Of DTE 10 Excel 32 Premium Quality Hydraulic Oils

The Mobil DTE 10 Excel Series hydraulic oils provide outstanding hydraulic system efficiency; ultra keep clean performance, and a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial and mobile equipment, reducing operating costs and improving productivity. Their excellent oxidation and thermal stability can help to extend oil and filter change intervals while helping to ensure clean systems. Their high level of anti-wear properties and excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

Features Advantages and Potential Benefits
Excellent Hydraulic Efficiency Potentially reduced energy consumption or increased system responsiveness
Ultra Keep Clean Performance Reduced system deposits leading to reduced machine maintenance and increased component life
Shear Stable, High Viscosity Index Sustained component protection over a wide temperature
Oxidation and Thermal Stability Extends fluid life even under harsh operating conditions
Good compatibility with elastomers and seals Long seal life and reduced maintenance
Anti-wear properties Helps reduce wear and protects pumps and components for extended equipment life
Excellent Air Separation Characteristics Helps prevent aeration and cavitation damage in low residence time systems
Multi metal compatibility Helps ensure excellent performance and protection with a wide variety of component metallurgy

Applications Of DTE 10 Excel 32

  • Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
  • Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
  • Systems where cold start-up and high operating temperatures are typical
  • Systems requiring a high degree of load-carrying capability and anti-wear protection
  • Machines employing a wide range of components using various metallurgy
Specifications and Approvals Of DTE 10 Excel 32
This product has the following approvals: 15 22 32 46 68 100 150
ARBURG Hydraulic Fluid X
BoschRexroth Fluid Rating List 90245 X X X
DENISON HF-0 X X X
FRANK MOHN Framo Hydraulic Cargo Pumping System X
Fives Cincinnati P-69 X
Fives Cincinnati P-70 X
HOCNF Norway-NEMS, Black X X X X X X X
ORTLINGHAUS-WERKE GMBH ON 9.2.10 X X X X
STROMAG AG TM-000 327 X
This product is recommended for use in applications requiring: 15 22 32 46 68 100 150
EATON VICKERS 694 (encompasses former I-286-S, M-2950-S, or M-2952-S) X X X
This product meets or exceeds the requirements of: 15 22 32 46 68 100 150
DIN 51524-2:2006-09 X X X X X X X
DIN 51524-3:2006-09 X X X X X
ISO L-HV (ISO 11158:1997) X X X X X
JCMAS HK VG32W X
JCMAS HK VG46W X
KRAUSS-MAFFEI Hydraulic Oil X
VN 108 4.3.3 Aug 2014 X X X
Properties and Specifications Of DTE 10 Excel 32
Property 15 22 32 46 68 100 150
Grade ISO 15 ISO 22 ISO 32 ISO 46 ISO 68 ISO 100 ISO 150
Brookfield Viscosity @ -20 C, mPa.s, ASTM D2983 1090 1870 3990 11240 34500
Brookfield Viscosity @ -30 C, mPa.s, ASTM D2983 3360 7060 16380 57800
Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 2620 6390 14240 55770
Copper Strip Corrosion, 3 h, 100 C, Rating, ASTM D130 1B 1B 1B 1B 1B 1B 1B
Density @ 15.6 C, kg/l, ASTM D4052 0.837 0.841 0.846 0.850 0.862 0.877 0.881
Dielectric Strength, kV, ASTM D877 45 54 49 41
FZG Scuffing, Fail Stage, DIN 51354 12 12 12 12 12
Flash Point, Cleveland Open Cup, °C, ASTM D92 178 212 215 232 240 241 246
Foam, Sequence I, Stability, ml, ASTM D892 0 0 0 0 2 0 0
Foam, Sequence I, Tendency, ml, ASTM D892 20 20 20 20 20 20 20
Foam, Sequence II, Stability, ml, ASTM D892 0 0 0 0 0 0
Foam, Sequence II, Tendency, ml, ASTM D892 20 20 20 20 20 20 20
Foam, Sequence III, Stability, ml, ASTM D892 0 0 0 0 0 0 0
Foam, Sequence III, Tendency, ml, ASTM D892 20 20 20 20 20 20 20
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 4.07 5.07 6.63 8.45 11.17 13 17.16
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 15.8 22.4 32.7 45.6 68.4 99.8 155.6
Pour Point, °C, ASTM D97 -56 -52 -49 -43 -38 -34 -34
Shear Stability, %KV Loss, CEC L-45-A-99 5 5 5 7 11 7 7
Viscosity Index, ASTM D2270 168 164 164 164 156 127 120

If you wish to buy DTE 10 Excel 32 of Mobil from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.

DTE 10 Excel 32, Mobil In India
We can give you the best cost prices to buy DTE 10 Excel 32 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India

Premium Quality Hydraulic Oils DTE 10 Excel 32, Mobil In India
We can also ship DTE 10 Excel 32 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card