Heat Transfer Oil S2 Shell
Heat Transfer Oil S2 :
Shell Heat Transfer Oil S2 is based on carefully selected, highly refined mineral oils chosen for their ability to
provide superior performance in indirect closed fluid heat transfer systems.
Performance, Features & Benefits Of Shell Heat Transfer Oil S2
- Extended maintenance intervals
Shell Heat Transfer Oil S2 is based on carefully selected
highly refined mineral oils and resists oil cracking, oxidation and thickening. This provides extended oil life, provided efficient fluid heating and good pump circulation is ensured, such that film temperatures on the heater surface do not exceed the limits below. - System efficiency
Low viscosity enables excellent fluidity and heat transfer
over a wide temperature range. Shell Heat Transfer Oil S2 also has a low vapour pressure so resists cracking. This minimises the formation of volatile decomposition products; these would require recovery via expansion chamber and condensate collector. - Wear protection
Shell Heat Transfer Oil S2 is non-corrosive and has high
solvency – this reduces deposit formation by holding oxidation products in solution and keeping internal surfaces of heat exchangers clean.
Enclosed circulated heat transfer systems for industrial applications such as process industry, chemical plants, textile producers etc. and in household equipment such as oil filled radiators. - Shell Heat Transfer Oil S2 can be used in high temperature
continuous heat transfer equipment with the following
application limits: - Max. film temperature : 320ºC
- Max. bulk temperature : 300ºC
Specifications, Approvals & Recommendations Of Heat Transfer Oil S2
- Classified as ISO 6743-12 Family Q
- Meets DIN 51522 requirements
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.
Typical Physical Characteristics Of Heat Transfer Oil S2
| Properties | Method | Shell Heat Transfer Oil S2 | ||
|---|---|---|---|---|
| Density | @200C | kg/m3 | ISO 12185 | 857 |
| Flash Point (PMCC) | 0C | ISO 2719 | 208 | |
| Flash Point (COC) | 0C | ISO 2592 | 220 | |
| Pour Point | 0C | ISO 3016 | -12 | |
| Kinematic Viscosity | @400C | mm2/s | ISO 3104 | 29 |
| Kinematic Viscosity | @1000C | mm2/s | ISO 3104 | 5.1 |
| Kinematic Viscosity | @2000C | mm2/s | ISO 3104 | 1.4 |
| Initial Boiling Point | 0C | ASTM D2887 | 330 | |
| Autoignition temperature | 0C | DIN 51794 | 332 | |
| Neutralisation Value | mg KOH/g | ASTM D974 | <0.2 | |
| Ash (Oxide) | % m/m | ISO 6245 | <0.01 |
If you wish to buy Heat Transfer Oil S2 of Shell from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
Heat Transfer Oil S2, Shell in India
We can give you the best cost prices to buy Heat Transfer Oil S2 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
High Performance Heat Transfer Fluid Heat Transfer Oil S2, Shell in India
We can also ship Heat Transfer Oil S2 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.
