Hyspin HLP-D 32 Castrol
Hyspin HLP-D 32 :
The Hyspin HLP-D hydraulic oil range of lubricants are based upon highly refined mineral oil enhanced with a zinc additive system. They also contain detergent and dispersant additives.
Application Of India Hyspin HLP-D 32
Hyspin HLP-D oils are for use primarily in machine tool hydraulic systems, gears and clutch drives and in mobile hydraulic systems used outdoors.
These oils can tolerate high levels of water contamination, either from the outdoors environment or by water miscible cutting oils when used in machine tool equipment, and still provide effective lubrication. Such contamination can cause corrosion and seizure of hydraulic components. The detergent /dispersant properties of Hyspin HLP-D oils maintain the performance of hydraulic systems under these circumstances.
In hydraulic cylinders operating at low speeds, Hyspin HLP-D oils prevent erratic movement and stick/slip between seals and shafts, greatly reducing seal wear.
Hyspin HLP-D oils are suitable for mobile equipment where multi-disc clutches are employed, They permit higher torques to be transmitted, and maintain smooth clutch operation, short engagement times, and low rates of clutch wear.
The Hyspin HLP-D range is fully compatible with common seal materials. Hyspin HLP-D is classified as follows:
DIN classification - HLP-D
ISO 6743/4 - Hydraulic Oils Type HM
Hyspin HLP-D grades meet the requirements of:
DIN 51524 Part 2 (except for demulsification)
Advantages Of Hyspin HLP-D 32
- Smooth functioning of sliding parts in hydraulic systems and machine tools.
- Good surface wetting properties provide smooth sliding of seals on hydraulic pistons and rods and reduces corrosion.
- Excellent corrosion protection in arduous conditions.
- Maintains performance in ‘wet’ operating conditions, eg outdoor equipment, machining operations.
Typical Characteristics Of Hyspin HLP-D 32
| Name | Method | Units | HLP-D 22 | HLP-D 32 | HLP-D 46 | HLP-D 68 |
|---|---|---|---|---|---|---|
| Density @ 15°C / 59°F | ISO 12185 / ASTM D4052 | kg/m3 | 870 | 880 | 880 | 880 |
| Kinematic Viscosity @ 40°C / 104°F | ISO 3104 / ASTM D445 | mm²/s | 22 | 32 | 46 | 68 |
| Kinematic Viscosity @ 100°C / 212°F | ISO 3104 / ASTM D445 | mm²/s | 4.3 | 5.4 | 6.8 | 8.8 |
| Viscosity Index | ISO 2909 / ASTM D2270 | - | >95 | >95 | >95 | >95 |
| Pour Point | ISO 3016 / ASTM D97 | °C | -33 | -30 | -24 | -24 |
| Flash Point - open cup method | ISO 2592 / ASTM D92 | °C | 210 | 220 | 225 | 230 |
| Foam Sequence I - tendency / stability | ISO 6247 / ASTM D892 | ml/ml | 50/0 | 50/0 | 50/0 | 50/0 |
| Rust test - synthetic seawater (24 hrs) | ISO 7120 / ASTM D665B | Rating | Pass | Pass | Pass | Pass |
| FZG Gear Scuffing test - A/8.3/90 | ISO 14635-1 | Failure Load Stage | - | 12 | 12 | 12 |
| Copper corrosion (3 hrs 100°C/ 212°F) | ISO 2160 / ASTM D130 | Rating | 1A | 1A | 1A | 1A |
If you wish to buy Hyspin HLP-D 32 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
Hyspin HLP-D 32, Castrol in India
We can give you the best cost prices to buy Hyspin HLP-D 32 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Detergent Hydraulic Oil Hyspin HLP-D 32, Castrol in India
We can also ship Hyspin HLP-D 32 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.