Mobiltherm 605 Mobil

Mobiltherm 605 Mobil

Mobiltherm 605 :

Mobiltherm heat transfer oils are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.

Mobiltherm heat transfer oils are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.

Mobiltherm heat transfer oils have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. They demonstrate specific heat and thermal conductivities that provide more rapid heat dissipation. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended.

Features and Benefits Of Mobiltherm 605 Heat Transfer Oil

Mobiltherm 600 Series offer the following benefits:

Mobiltherm oils are important members of the Mobil brand of specialty fluids that have gained a reputation for performance and reliability, even in severe applications. Modern refining techniques are a key factor in providing the excellent product features

Features Advantages and Potential Benefits
High resistance to thermal cracking and decomposition Free from sludge and coke deposits and minimum interference with heat transfer capability and minimized maintenance needs
Excellent thermal properties High heat transfer rates and improved operating efficiency and lower operating costs
Good thermal and oxidative stability Long trouble free service life and reduced downtime
Good low temperature fluidity Easy starting of cold systems

Applications Of Mobiltherm 605

Application Considerations: Mobiltherm heat transfer oils should not be mixed with other oils since this may impair the excellent thermal and oxidation stability resulting in a change in other properties, and complicate analyses aimed at determining useful oil life. If the oils are used above their recommended maximum temperatures, vapor lock may result unless the system is designed to operate at the higher temperature by pressurizing with an inert gas such as nitrogen. At higher temperatures, fluid life will be shortened because the rate of thermal degradation which increases markedly as temperatures rise above the recommended limit. In well-designed systems the temperature of the oil film surrounding the heating element should be about 15ºC to 30ºC above the bulk oil temperature. If higher than this, the service life of the oil may be shortened and sludge and coke may be deposited which would interfere with the heat transfer rates.

As with other mineral oils, Mobiltherm heat transfer oils should be used only in systems with forced circulation. Systems that depend on convection for circulation of the heat transfer medium do not provide a rapid enough flow to prevent local overheating and rapid deterioration of the oil. Further, these oils are not recommended for use in open systems where hot oil is exposed directly to the air. If they spray or escape from leakage points, hot Mobiltherm oils may spontaneously ignite.

  • Mobiltherm 600 series can be used in open and closed installations where the bulk oil temperature ranges are as outlined in the table below.
  • Mobiltherm 603: Closed Systems (up to 285º C), Open Systems (up to 150º C)
  • Mobiltherm 605: Closed Systems (up to 315º C), Open Systems (up to 180º
  • Mobiltherm 610: Open systems (up to 250°C)
  • Mobiltherm 611: Open systems (up to 275°C)
Properties and Specifications Of Mobiltherm 605
Property 603 605 610 611
Density @ 15 C, kg/l, ASTM D1298 0.835 0.857 0.880 0.906
Flash Point, Cleveland Open Cup, °C, ASTM D92 194 230 250 294
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 4.2 5.4 11.5 31.5
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 20.2 30.4 113 490
Pour Point, °C, ASTM D97 -15 -12 -6 -6

If you wish to buy Mobiltherm 605 of Mobil from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.

Mobiltherm 605, Mobil In India
We can give you the best cost prices to buy Mobiltherm 605 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

Heat Transfer Oil Mobiltherm 605, Mobil In India
We can also ship Mobiltherm 605 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card