Molub-Alloy 100-2 HT Castrol
Molub-Alloy 100-2 HT :
MOLUB-ALLOY 100-2 HT (previously named Viscotemp 2) is a fully synthetic high temperature grease for lubrication points constantly exposed to extremely high temperatures. It ensures long-term lubrication of sliding and rolling bearings and other greasing points at high operating temperatures, elevated bearing pressures and aggressive ambient conditions.
Application Of Castrol Molub-Alloy 100-2 HT
- For rolling and sliding bearings as well as grease-lubricated sliding surfaces in the high temperature range.
- For fan bearings in hot air streams.
- For calender bearings, baking plants and continuous-flow driers.
- In overhead conveyors of painting lines subjected to chemicals.
- For applications with exposure of hot and cold water as well as steam.
- Temperature application range: - 20°C/- 4°F to + 220°C/+ 428°F.
Conditions of Use Of Molub-Alloy 100-2 HT
- Please follow the specifications of the rolling bearing manufacturers.
- Do not mix with other lubricating greases. In case of doubt please contact the Technical Service.
- Thoroughly clean the bearings before introducing the first fill.
- Fill bearing housing only about half full with MOLUB-ALLOY 100-2 HT.
- Higher temperatures are possible for short-term applications.
- Please consult our engineers.
Advantages Of Molub-Alloy 100-2 HT
- Extremely temperature-stable.
- Resistant to hot and cold water.
- Resistant to aggressive ambient influences.
- High protection against friction and wear.
- Excellent load bearing capacity.
- Reliable corrosion protection.
- Silicone-free
Typical Characteristics Of Molub-Alloy 100-2 HT
| Name | Method | Units | Molub-Alloy 100- |
|---|---|---|---|
| 2 HT | |||
| Colour | Visual / ASTM D1500 | - | White Yellowish |
| Base oil | - | - | PAO/ Ester |
| Thickner type | - | - | Organic Thickener |
| Density @ 20°C / 68°F | Inhouse method | kg/m³ | 1060 |
| Base Oil Viscosity @ 40°C / 104°F | ASTM D445 / ISO 3104 | mm²/s | 120 |
| Dropping Point | ASTM D566 / ISO 2176 | °C/°F | >300/>572 |
| Worked Penetration (60 strokes @ 25°C / 77°F) | ASTM D217 / ISO 2137 | 0.1 | 265-295 |
| mm | |||
| Worked Penetration (100,000 strokes @ 25°C / 77°F) - change from 60 strokes | ASTM D217 / ISO 2137 | 0.1 | 15 |
| mm | |||
| Water Resistance | DIN 51807-1 | Rating | 0 |
If you wish to buy Molub-Alloy 100-2 HT of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy 100-2 HT, Castrol in India
We can give you the best cost prices to buy Molub-Alloy 100-2 HTcompared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Fully Synthetic High Temperature Grease for Long Term Lubrication Molub-Alloy 100-2 HT, Castrol in India
We can also ship Molub-Alloy 100-2 HT to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
