Molub-Alloy 140/460 Castrol
Molub-Alloy 140/460 :
Castrol Molub-Alloy gear oils were developed for the lubrication of enclosed gears. They are manufactured from the highest quality components that have been carefully selected for their compatibility with Molub-Alloy lubricating solids.
Load carrying capabilities are derived from Molub-Alloy's formulation and the proprietary blend of lubricating solids. These metallic lubricating solids are treated to increase their natural affinity for metal surfaces. Also, they are completely dispersed to assure effectiveness over the life of the oil.
Rust and oxidation inhibiting characteristics are maximized to afford effective rust protection and long service life.
Application Of Castrol Molub-Alloy 140/460
Molub-Alloy gear oils are recommended for spur, helical, herringbone, and straight or spiral bevel gears. They are especially suited for heavy duty and shock loading where Extreme Pressure (EP) characteristics are required.
They should not be used where gear manufacturers specify the use of non-EP lubricants. For severe worm gear service where ‘compounded’ gear oils are recommended use Molub-Alloy 170 W / 680.
Molub-Alloy gear oil 300 S / 1000 is especially suited for service in enclosed gears for heavy-duty industry and mining machinery.
Advantages Of Molub-Alloy 140/460
- Reduced friction, most evident under boundary conditions, is directly attributed to the presence of specially compounded lubricating solids. This benefit is most pronounced where frequent start-up, slow speeds, and high and unexpected loads are encountered.
- The establishment of a protective layer of Molub-Alloy solids provides substantial increase in the working
- Realistic energy savings are possible through a reduction in peak power demand during cold start-up.
- Seal leakage is greatly reduced.
- Only compatible base oils that control rubber swelling tendencies are used. The Molub-Alloy solids lubricate and improve seal contact surfaces.
- Overall savings are derived from the above and result from less labour and downtime, smoother, more efficient operation with longer parts life, and extended lubrication cycles
Additional Information Of Molub-Alloy 140/460
Molub-Alloy gear oils cannot be used with diatomaceous earth or any other adsorbent, surface active filter medial.
Typical Characteristics Of Molub-Alloy 140/460
If you wish to buy Castrol Molub-Alloy 140/460 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Castrol Molub-Alloy 140/460, Castrol in India
We can give you the best cost prices to buy Castrol Molub-Alloy 140/460compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Gear oils Castrol Molub-Alloy 140/460, Castrol in India
We can also ship Castrol Molub-Alloy 140/460 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.