Molub-Alloy 2115-2 Castrol
Molub-Alloy 2115-2 :
Castrol Molub-Alloy 2115-2 grease is a thermally stable high temperature synthetic bearing lubricant. It is formulated from an advanced synthetic fluid and thickened with a temperature stable non-soap base. Molub-Alloy 2115-2 includes a blend of performance additives and Molub-Alloy lubricating solids for exceptional wear protection and is designed to greatly extend service life and relubrication intervals in high temperature bearings, compared to conventional greases.
Application Of Castrol Molub-Alloy 2115-2
Primarily developed for extended service in oven conveyor bearings, Molub-Alloy 2115-2 is recommended for bearings operating in paint drying ovens, textile tentering frames, and similar applications where minimum reapplication and drip- free performance is required. Molub-Alloy 2115-2 can be used in continuous service at 250°C/482°F and may be exposed to intermittent temperatures up to 280ºC/536ºF. Forced draft ventilation should be used at temperatures exceeding 200ºC. Molub-Alloy 2115-2 can be applied manually or with automatic dispensing equipment.
Advantages Of Molub-Alloy 2115-2
- Thermally and chemically stable – high resistance to oxidation at high temperatures therefore extending relubrication intervals without undue risk of under lubrication,lubrication starvation,or an increase in power draw.
- Virtually inert below 300ºC/572ºF- resists the thickening and hardening that is typical of petroleum greases in high temperature service.
- Even at high temperatures (refer application section), Molub-AIIoy 2115-2 is resistant to most non-fluorinated solvents and most chemicals, including strong acids, alkalis and oxidising agents.
- Low volatility - does not volatilise readily at high temperatures and/or when exposed to high vacuum.
Additional Information Of Molub-Alloy 2115-2
Molub-Alloy 2115-2 should not be mixed with other greases or oils. In case of doubt please consult your local Technical Services. Molub-Alloy 2115-2 has a very low order of toxicity at room temperature with no significant irritation to skin or eyes.
Typical Characteristics Of Molub-Alloy 2115-2
| Name | Method | Units | 2115-0 | 2115-2 |
|---|---|---|---|---|
| Appearance | Visual | - | White | White |
| Thickener type | - | - | PTFE | PTFE |
| Base oil | - | - | PFPE | PFPE |
| Consistency | ISO 2137/ASTM D217 | NLGI Grade | 0 | 2 |
| Density @ 20°C / 68°F | in-house method CIP 19 | kg/m³ | 1970 | 1990 |
| Unworked Penetration (@ 25°C / 77°F) | ISO 2137/ASTM D217 | 0.1 mm | 355-385 | 265-295 |
| Base Oil Viscosity @ 40°C / 104°F | ISO 3104/ASTM D445 | mm²/s | 510 | 510 |
| Base Oil Viscosity @ 100°C / 212°F | ISO 3104/ASTM D445 | mm²/s | 46 | 46 |
| Base Oil Viscosity @ 200°C / 392°F | ISO 3104/ASTM D445 | mm²/s | 6.5 | 6.5 |
| Copper Corrosion (24 hrs,100°C / 212°F) | ASTM D4048 | Rating | - | 1b |
| Evaporation Loss ( 24 hrs @ 232°C / 450°F) | DIN 58397 | %wt | - | 1 |
| Flash Point Base Oil - open cup method | ISO 2592/ASTM D92 | °C/°F | None | None |
| Pour Point Base Oil | ISO 3016/ASTM D97 | °C/°F | 5 | 5 |
If you wish to buy Molub-Alloy 2115-2 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy 2115-2, Castrol in India
We can give you the best cost prices to buy Molub-Alloy 2115-2compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
High Temperature Grease Molub-Alloy 2115-2, Castrol in India
We can also ship Molub-Alloy 2115-2 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
