Molub-Alloy 6040/460-1.5 Castrol
Molub-Alloy 6040/460-1.5 :
Castrol Molub-Alloy 6040 grease is based on a unique calcium-complex sulfonate thickener containing premium petroleum base oils with select additives for extreme pressure characteristics.
Greases using calcium sulfonate thickeners have inherent anti-oxidant and rust-inhibiting properties, along with high dropping points and extreme pressure (EP) /anti-wear characteristics. The use of this complex thickener offers advantages over other organic grease thickeners such as polyurea. It also works better than inorganics like aluminium bentonites or fumed silica.
Application Of Castrol Molub-Alloy 6040/460-1.5
Molub-Alloy 6040 is a high-performance, multi-purpose grease that exhibits excellent adhesive and cohesive characteristics, anti wear capabilities and extreme pressure properties which make it suitable for use in:
- Plain / journal or anti-friction bearings in applications operating under extreme environmental conditions such as in rolling mills and continuous casters in steel mill plants, and in forming and press section in paper mills,
- Applications with frequent start-ups, low speeds, or where high loads and shock loading are commonplace, such as in mining heavy duty equipment
- Low speed highly loaded coupling systems used extensively in metal rolling mill applications and in high horsepower transmitting such as in curved tooth couplings.
- Applications where resistance to aggressive process waters and protection against corrosive environments is highly demanded
Advantages Of Molub-Alloy 6040/460-1.5
- Exceptional water resistance – the film coating stays on the surface in the presence of water – including hot and chemically active process waters
- Advanced EP and anti-wear properties - protec s equipment against extreme loading and helps minimize bearing wear
- Superior mechanical stability – helps reduce product consumption in high volume applications
- High dropping point – withstands breakdown in high temperature applications
- Resists oxidation and prevents corrosive activity on bearings in aggressive process water environments
- Suitable for applications utilizing both ferrous or non—ferrous metallurgies
Additional Information Of Molub-Alloy 6040/460-1.5
In order to minimize potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, re-lubrication intervals should be monitored closely to ensure all previous lubricant is purged.
Typical Characteristics Of Molub-Alloy 6040/460-1.5
| Name | Method | Units | 6040/150-2 | 6040/460-1.5 |
|---|---|---|---|---|
| Consistency | ISO 2137 / ASTM D217 | NLGI | 2 | 1.5 |
| Grade | ||||
| ISO Viscosity | - | - | 150 | 460 |
| Colour | Visual | - | Amber | Amber |
| Thickener type | - | - | Calcium Sulfonate | Calcium Sulfonate |
| Worked Penetration (60 strokes @ 25°C / 77°F) | ISO 2137 / ASTM D217 | 0.1 mm | 290 | 295 |
| Worked Penetration (100,000 strokes @ 25°C / 77°F) - change from 60 strokes | ISO 2137 / ASTM D217 | 0.1 mm | +/- 10 | +/- 10 |
| Dropping point | ASTM D2265 | °C/°F | 260/500 | 288/550 |
| Base Oil Viscosity @ 40°C / 104°F | ISO 3104 / ASTM D445 | mm²/s | 150 | 460 |
| Base Oil Viscosity @ 100°C / 212°F | ISO 3104 / ASTM D445 | mm²/s | 14.4 | 30.1 |
| Flash Point - open cup method | ISO 2592 / ASTM D92 | °C/°F | 260/500 | 288/550 |
| Timken OK Load | ASTM D2509 | kg / lbs | 22.7 / 50 | 22.7 / 50 |
| Water Wash-out | ISO 11009 / ASTM D1264 | % wt loss | 3.2 | 1.8 |
| Four Ball Weld Load test - Weld Point | ISO 11008 / ASTM D2596 | kgf | 400 | 400 |
| Four Ball Wear test - Wear Scar Diameter (40 kgf / 75°C / 1800 rpm / 1 hr) | ISO 51350 / ASTM D2266 | mm | 0.55 | 0.6 |
| Copper Corrosion (24 hrs,100°C / 212°F) | ASTM D4048 | Rating | 1b | 1b |
| Oil Separation (24 hrs, 0.25 psi, 25°C / 77°F) | ASTM D1742 | % wt | 2 | 0 |
| Roll Stability test - Shear Stability | ASTM D1831 | 0.1 mm | +/- 10 | +/- 10 |
| Oxidation Stability - Rotating Pressure Vessel test | ASTM D942 / DIN 51808 | pressure drop psi | 6.5 | 6.5 |
If you wish to buy Molub-Alloy 6040/460-1.5 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy 6040/460-1.5, Castrol in India
We can give you the best cost prices to buy Molub-Alloy 6040/460-1.5compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Calcium Complex Grease Molub-Alloy 6040/460-1.5, Castrol in India
We can also ship Molub-Alloy 6040/460-1.5 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.