Molub-Alloy 777-1 ES Castrol
Molub-Alloy 777-1 ES :
Castrol Molub-Alloy 777 ES greases are designed for very heavy duty service in extreme environments.
They are blended and compounded to withstand heavy and shock loading, commonly found in the steel/primary metals, construction, mining, and forest products industries.
Molub-Alloy 777 ES greases are made using a blend of high quality petroleum oils, polymers and Molub-Alloy lubricating solids. These lubricating solids work synergistically with chemical anti-wear and extreme pressure (EP) additives to reduce contact temperatures and wear while providing outstanding protection under extreme pressure and shock load conditions.
Rust and oxidation inhibiting characteristics are maximised to afford effective rust protection and long life of the grease.
Application Of Castrol Molub-Alloy 777-1 ES
Molub-Alloy 777 ES are multi-purpose greases that operate effectively in plain/journal and anti-friction bearings. They exhibit excellent adhesive and cohesive characteristics and are highly resistant to mechanical shearing.
Typical applications include ball and roller bearings, bushings, slides, screws, and general lubrication where loads may be heavy and speeds low. Industries most commonly requiring the heavy duty, all weather capabilities of Molub-Alloy 777 ES greases include steel, mining, logging, chemical, and construction.
Molub-Alloy 777 ES 1 and 2 meet the specification of Bucyrus International (CAT) and Komatsu greases. (with lubricating solids <5% by weight and <10 µm max particle size).
Advantages Of Molub-Alloy 777-1 ES
- Excellent friction reduction characteristics due to Molub-Alloy solid lubricants – easier start-up, reduced heat, and reduced energy leading to longer bearing life
- Excellent mechanical stability ¬– grease keeps its consistency in service ensuring long term protection
- Easily pumpable in central lubrication systems
- Excellent water resistance – coating film stays on the surface even in the presence of water
- Provides protection against copper and steel corrosion
- Excellent EP and anti-wear properties – protects equipment against extreme/shock loading and helps minimise bearing components wear and hence extends equipment life
Additional Information Of Molub-Alloy 777-1 ES
In order to minimise potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, relubrication intervals should be monitored closely to ensure all previous lubricant is purged. Not to be used in precision and high speed bearings.
Typical Characteristics Of Molub-Alloy 777-1 ES
| Name | Method | Units | 777-1 ES | 777-2 ES |
|---|---|---|---|---|
| Appearance | Visual | - | Smooth and | Smooth and |
| homogeneous | homogeneous | |||
| Colour | Visual | - | dark grey | dark grey |
| Thickener type | - | - | Lithium | Lithium |
| Base oil type | - | - | Mineral | Mineral |
| Consistency | ISO 2137 / ASTM D217 | 1 | 2 | |
| Worked Penetration 60 strokes @ 25°C/77°F | ISO 2137 / ASTM D217 | 10-Jan | 310 - 340 | 265 - 295 |
| mm | ||||
| Worked Penetration 100000 strokes @ 25°C/77°F change from 60 strokes | ISO 2137 / ASTM D217 | 10-Jan | 20 | 22 |
| mm | ||||
| Density @ 20°C / 68°F | inhouse methode | kg/m³ | 0.881 | 0.883 |
| Dropping point | ISO 2176 ASTM D2265 | °C / °F | 180+ / 356+ | 180+ / 356+ |
| Base oil Viscosity @ 40°C / 104°F | ISO 3104 | mm²/s | 950 | 950 |
| ASTM D 445 | ||||
| Base oil flash point | ISO 2592 | °C / °F | 230 / 417 | 230 / 417 |
| ASTM D 92 | ||||
| Rust Test 48hrs @ 52°C / 162°F | ASTM D 1743 | rating | pass | pass |
| Corrosion Protection (SKF Emcor) | ISO 11007 | rating | 0/0 | 0/0 |
| ASTM D 6138 | ||||
| Copper Corrosion 24hrs 100°C/ 212°F | ISO 2160 | rating | 1b | 1b |
| ASTM D 4048 | ||||
| Four ball weld load test | ASTM D 2596 | Kg | 620 | 620 |
| Four ball Load wear index | ASTM D 2596 | Kg | 100 | 100 |
| Four ball wear Test (1hrs, 40kg, 1200rpm, 75°C / 167°F) scar diameter | ||||
| ASTM D 2266 | mm | 0.55 | 0.55 | |
| Four ball wear (1000N, 1 min) scar diameter | DIN 51350-E | mm | 0.9 | 0.9 |
| Timken EP test, OK load | ASTM D 2509 | Kg / Lbs | 23/50 | 23/50 |
| IP 326 | ||||
| Water wash out @ 79°C / 175°F | ASTM D 1264 | % loss | 5.4 | 3.2 |
| Water resistance, 90°C / 194°F, 3hrs | DIN 51807-1 | rating | 1 | 1 |
| Roll stability, 2hrs, 25°C / 77°F, penetration change | ASTM D 1831 | % | 10 | 5 |
| change |
If you wish to buy Molub-Alloy 777-1 ES of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy 777-1 ES, Castrol in India
We can give you the best cost prices to buy Molub-Alloy 777-1 EScompared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
High Performance Grease Molub-Alloy 777-1 ES, Castrol in India
We can also ship Molub-Alloy 777-1 ES to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
