Molub-Alloy 860/150-1 ES Castrol

Molub-Alloy 860/150-1 ES :

Castrol Molub-Alloy 860 ES greases are high-performance multi-service lithium complex greases formulated from premium petroleum base oils, lubricating solids and a combination of corrosion inhibitors specifically chosen for protection against corrosive process waters. These are designed to extend the service life of bearings in heavy-duty applications and at elevated temperatures. Molub-Alloy 860 ES greases provide an appropriate oil film for applications at slower to moderate speeds, higher loads, and/or higher temperatures sustained for longer periods of time. The load- carrying and anti-wear capabilities of Molub-Alloy 860 ES greases exceed conventional complex greases. High- performance is the result of chemical additives working synergistically with select Molub-Alloy lubricating solids which are dispersed uniformly throughout the grease. These lubricating solids offer their greatest benefit at slow speeds or when bearings endure heavy loads and shocks. Solids also protect newly machined bearing surfaces during the critical period of ‘running in’. Good bearing surfaces are essential for long service life.

Application Of Castrol Molub-Alloy 860/150-1 ES

Primary metals,including steel use Molub-Alloy 860 ES greases near hot ingots, soaking pits, and reheat furnaces to lubricate pit cover carriages, mill stand screws, slipper couplings, roll bearings,manipulators and guide rolls for continuous casters. Paper and forest products–on paper machines, use Molub-Alloy 860 ES greases on the ‘wet end’ couch, suction,and press roll bearings where water wash, corrosive process  waters, and high temperatures are present. Molub-Alloy 860 ES greases have been used successfully in all heavy-duty industry applications including anti- friction bearings, bushings, mill rolls and couplings.

  • Molub-Alloy 860/150 ES greases should be used when loads are moderate-to-heavy, temperatures are elevated (up to 204ºC/400ºF) and speeds are moderate-to-high.
  • Molub-Alloy 860/220 ES greases should be used when loads are moderate-to-heavy,temperatures are elevated (up to 204ºC/400ºF) and speeds are slow-to-moderate
  • Molub-Alloy 860/460 ES greases should be used when loads are heavy, temperatures are elevated (up to 204ºC/ 400ºF) and speeds are slow

Advantages Of Molub-Alloy 860/150-1 ES

  • Excellent friction reduction characteristics due to Molub-Alloy solid lubricants – easier start-up, reduced heat, and reduced energy leading to longer bearing life.
  • Exceptional water resistance – coating film stays on the surface even in presence of water, even when exposed to the action of hot and chemically active process water.
  • Excellent EP and anti-wear properties – protects equipment against extreme/shock loading and helps minimize bearing component wear and hence extends equipment life.
  • Excellent mechanical stability and adhesion – grease keeps its consistency in service ensuring long-term protection and reduced consumption as film stays between lubricated surfaces.
  • Outstanding oxidation/thermal stability and high dropping point – provides reliable performance and extended lubricant life in high-temperature applications.
  • Formulated to address environmental concerns ¬– it is free of antimony, barium, lead, and zinc.
Additional Information Of Molub-Alloy 860/150-1 ES

At temperatures above 121ºC/250ºF, regular reapplications of 860 ES must be considered. At temperatures near 177ºC/ 350ºF, weekly reapplications of 860 ES are suggested. For continuous service near 204ºC/400ºF, reapply 860 ES daily or once each shift. Molub-Alloy 860 ES greases have been used above 232ºC/450ºF. However, frequent reapplication of grease is necessary to prevent deterioration of the petroleum base oil. Reapply before the grease in the bearing stiffens.In order to minimize potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation,relubrication intervals should be monitored

Typical Characteristics Of Molub-Alloy 860/150-1 ES
Name Method Units 150-1 150-2 220-0 220-1 220-2 460-1 460-2
ES ES ES ES ES ES ES
Appearance Visual - Dark grey
Thickener type - - Lithium complex
Base oil - - Mineral oil
Consistency ISO 2137 / ASTM D217 NLGI 1 2 0 1 2 1 2
Grade
Density @ 20°C / 68°F ASTM D4052 / DIN 51757D kg/m³ - - - 883 886 887 896
Worked Penetration (60 strokes @ 25°C / 77°F) ISO 2137 / ASTM D217 0.1 mm 310- 265- 355- 310- 265- 310- 265-
340 295 385 340 295 340 295
Dropping point ASTM D2265 °C/°F 260+/ 260+/ - 260+/ 260+/ 260+/ 260+/
500+ 500+ 500+ 500+ 500+ 500+
Base Oil Viscosity @ 40°C / 104°F ISO 3104 / ASTM D445 mm²/s 150 150 220 220 220 460 460
Base Oil Viscosity @ 100°C / 212°F ISO 3104 / ASTM D445 mm²/s 14 14 16.6 16.6 16.6 28.5 28.5
Flash Point - open cup method ISO 2592 / ASTM D92 °C/°F 202/397 202/ 232/ 232/ 232/ 232/ 232/
397 450 450 450 450 450
Pour Point ISO 3016 / ASTM D97 °C/°F -0.112781955 -0.112781955 -0.112781955 -0.112781955 -0.112781955 -0.040214477 -0.040214477
Rust Test (distilled water) ASTM D1743 Pass Pass Pass Pass Pass Pass Pass Pass
Rust Test - EMCOR (distilled water) ISO 11007 / ASTM D6138 Rating 0/0 0/0 0/0 0/0 0/0 0/0 0/0
Copper Corrosion (24 hrs,100°C / 212°F) ASTM D4048 Rating 1b 1b 1b 1b 1b 1b 1b
Four Ball Weld Load test - ISO 11008 / ASTM D2596
Load Wear Index (27°C / 1770 rpm) - 60 60 60 60 60 60 60
Four Ball Weld Load test - Weld Point ISO 11008 / ASTM D2596 kgf 500 500 500 500 500 500 500
Four Ball Wear test - Wear Scar Diameter
(40 kgf / 75°C / 1200 rpm / 1 ASTM D2266 mm 0.6 0.55 0.55 0.55 0.55 0.5 0.5
hr)
Timken OK Load ASTM D2509 kg / lbs 23/50 23/50 23/50 23/50 23/50 27/60 27/60
Roll Stability test - Shear Stability ASTM D1831 0.1 mm 10 10 - 10 10 10 10
Water Wash-out ISO 11009 / ASTM D1264 %wt loss 6 4 - 6 4 4 4

If you wish to buy Molub-Alloy 860/150-1 ES of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.

Molub-Alloy 860/150-1 ES, Castrol in India
We can give you the best cost prices to buy Molub-Alloy 860/150-1 EScompared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

High-Performance Grease Molub-Alloy 860/150-1 ES, Castrol in India
We can also ship Molub-Alloy 860/150-1 ES to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card