Molub-Alloy BRB 572 Castrol
Molub-Alloy BRB 572 :
CASTROL MOLUB-ALLOY BRB 572 is a bearing grease, applicable for normal and elevated temperature (max. 120°C) and for long service intervals. Work and shear stability matches the service life of rolling bearings.Controlled mobility under “full pack” conditions act as a seal against contamination without excess churning and heat generation. The base oils used in CASTROL MOLUB-ALLOY BRB 572 are high-quality mineral oils, containing inhibitors against rust and corrosion, and they are fortified against oxidation. This unique grease is outstanding in shear stability and in controlled mobility under shear. This results from the selection of a most stable lithium thickening system and special manufacturing techniques. Load carrying and antiwear properties beyond those of conventional greases result from chemical additives working synergistically with select CASTROL MOLUB-ALLOY lubricating solids, blended uniformly throughout the grease.The lubricating solids are most effective in protecting the machined surfaces of new bearings in critical running-in periods. Good bearing surfaces are essential to extended service life.
Application Of Castrol Molub-Alloy BRB 572
- CASTROL MOLUB-ALLOY BRB 572 is an outstanding grease for all types of bearings (rolling, ball, roller bearings), including precision built. It is also used in general application, including journal bearings.
- “Full Pack Concept”: customarily, bearing manufacturers recommend packing bearings only 1/3 to 1/2 full to avoid churning, shear loss of consistency and overheating. In bearings with minimal grease capacity, CASTROL MOLUBALLOY BRB 572 can occupy effectively 60 % of this capacity.
- The bulk grease surrounding the action zone remains undisturbed, sealing out contaminants and minimizing “breathing” as a source of oxidation, water vapor and fine dust.
- In industrial operations the good sealing effect prevents dirt from entering the bearing.
- The outstanding physical and chemical stability of CASTROL MOLUB-ALLOY BRB 572 allows to extent relubrication intervals of bearings in inaccessible places.
Advantages Of Molub-Alloy BRB 572
- Excellent sealing from hazardous environments, including dust, water and water vapor.
- Overall savings are derived from the above, reduced maintenance costs and downtime, smoother and more efficient operation with extended part life and extended lubricating cycles.
Additional Information Of Molub-Alloy BRB 572
CASTROL MOLUB-ALLOY BRB 572 is not compatible with sodium or inorganic base greases. Lubrication intervals should be increased gradually, to ensure effective removal of previous lubricants and the formation of CASTROL MOLUB-ALLOY solid lubricants on the bearing surfaces.
CASTROL MOLUB-ALLOY BRB 572 may be applied by automatic dispensing systems designed for NLGI 2 consistency.
Typical Characteristics Of Molub-Alloy BRB 572
| Name | Method | Units | Molub-Alloy BRB 572 |
|---|---|---|---|
| DIN Classification | DIN 51502 | - | KPF 2K-30 |
| Thickener type | - | - | Lithium Soap |
| Worked Penetration (60 strokes @ 25°C / 77°F) | ISO 2137 / ASTM D217 | 0.1 mm | 265-295 |
| Worked Penetration (100,000 strokes @ 25°C / 77°F) - change from 60 strokes | ISO 2137 / ASTM D217 | 0.1 mm | max. 25 |
| Dropping point | ISO 2176 / ASTM D566 | °C/°F | >180/>356 |
| Base Oil Viscosity @ 40°C / 104°F | ISO 3104 / ASTM D445 | mm²/s | 143 |
| Base Oil Viscosity @ 100°C / 212°F | ISO 3104 / ASTM D445 | mm²/s | 13.5 |
| Flash Point - open cup method | ISO 2592 / ASTM D92 | °C/°F | >230/>446 |
| Water Resistance | DIN 51807-1 | Rating | 1 |
| Rust Test - EMCOR (distilled water) | ISO 11007 / ASTM D6138 | Rating | 0/0 |
| Copper Corrosion (3 hrs,100°C / 212°F) | ASTM D4048 | Rating | 1 |
| Roll Stability test - Shear Stability | ASTM D1831 | 0.1 mm | 3 |
| Timken OK Load | ASTM D2509 | kg/lbs | 16/35.3 |
| Four Ball Wear test - Wear Scar Diameter (40 kgf / 75°C / 1200 rpm / 1 hr) | ISO 51350 / ASTM D2266 | mm | 0.52 |
| Four Ball Wear test - Wear Scar Diameter | DIN 51350-5E | mm | <0.9 |
| SKF R2F-A test | SKF test method | Pass | Pass |
| SKF R2F-B test (120°C) | SKF test method | Pass | Pass |
| FE-9 Bearing Life test - A/1500/6000-150 | DIN 51821-2 | Pass | Pass |
| Flow pressure @ -20°C / -4°F | DIN 51805 | mbar | <600 |
If you wish to buy Molub-Alloy BRB 572 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy BRB 572, Castrol in India
We can give you the best cost prices to buy Molub-Alloy BRB 572compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Bearing Grease Molub-Alloy BRB 572, Castrol in India
We can also ship Molub-Alloy BRB 572 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
