Molub-Alloy CH 22 Spray Castrol
Molub-Alloy CH 22 Spray :
Castrol Molub-Alloy CH 22 Spray (previously called Molub-Alloy Chain Oil 22 Spray) is a multi-service chain lubricant designed for use in a variety of plant-wide chain applications. These lubricants are manufactured from a combination of the highest quality components together with an anti-wear/extreme pressure additive system including advanced Molub- Alloy lubricating solids. This product is also formulated to inhibit oxidation and to protect against rust and corrosion.
Application Of Castrol Molub-Alloy CH 22 Spray
Molub-Alloy CH 22 Spray is an excellent lubricant for wire ropes, especially those with a sisal or polypropylene core. It is highly inhibited to protect against rust and corrosion to protect the rope from within.
Molub-Alloy CH 22 without the propellant can be used on conveyors and chains operating at temperatures up to 90°C/ 190°F. It can be used intermittently at higher temperatures up to 150°C/300°F but more frequent re-lubrication may be required uner these conditions. Application of Molub-Alloy CH 22 Spray contains propellant so care must be taken when applied.
Advantages Of Molub-Alloy CH 22 Spray
- Resists accumulation of contamination and abrasive matter: The semi-dry lubrication properties provides a very light oil film, giving the appearance of a dry film. This ensures minimum pickup of abrasive dusts, lint, sand, and other particles, eliminating the formation of abrasive compounds which can increase wear and shorten chain life
- Excellent EP and anti-wear protection under boundary conditions: The compounded Molub-Alloy solids provide superior protection during frequent start-up, slow speeds, and when high and/or shock loads are encountered.
- Superior friction reduction: Promote reduced energy consumption during cold start-up and overall cost savings due to less downtime, more efficient operation, longer parts life and extended lubrication intervals
Typical Characteristics Of Molub-Alloy CH 22 Spray
| Name | Method | Units | Molub-Alloy CH 22 Spray |
|---|---|---|---|
| ISO Viscosity Grade | - | - | 22 |
| Density @ 15°C / 59°F | ASTM D4052 /ISO 12185 | kg/m³ | 891 |
| Kinematic Viscosity @ 20°C / 68°F | ASTM D445 / ISO 3104 | mm²/s | 59 |
| Kinematic Viscosity @ 40°C / 104°F | ASTM D445 / ISO 3104 | mm²/s | 22 |
| Kinematic Viscosity @ 100°C / 212°F | ASTM D445 / ISO 3104 | mm²/s | 3.9 |
| Flash Point - open cup method | ASTM D92 / ISO 2592 | °C/°F | 185 / 365 |
| Pour Point | ASTM D97 / ISO 3016 | °C/°F | 0.918367347 |
| Rust test - distilled water (24 hrs) | ASTM D665A / ISO 7120 | - | Pass |
| Rust test - synthetic seawater (24 hrs) | ASTM D665B / ISO 7120 | - | Pass |
| Carbon residue - Conradson test | ASTM D189 / ISO 6615 | % wt | 0.02 |
| Four Ball Wear test - Wear Scar Diameter (40 kgf / 75°C / 1200 rpm / 1 hr) | ASTM D2266 | mm | 0.5 |
| Four Ball Wear test - Wear Scar Diameter (300N / 1 hr) | DIN 51350-3B | mm | 0.4 |
If you wish to buy Molub-Alloy CH 22 Spray of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy CH 22 Spray, Castrol in India
We can give you the best cost prices to buy Molub-Alloy CH 22 Spraycompared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Multi-Service Chain Lubricant Molub-Alloy CH 22 Spray, Castrol in India
We can also ship Molub-Alloy CH 22 Spray to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
