Molub-Alloy GM 170W/680 Castrol

Email sales@lubeoilcompany.com or Call +919870666888 -

Molub-Alloy GM 170W/680 :

Castrol Molub-Alloy GM 170W/680 (previously called Molub-Alloy 170w/680) is manufactured from the highest qualitycomponents, carefully selected for their compatibility with Castrol Molub-Alloy GM lubricating solids. Metallic lubricating solids of suitable grade are treated to increase their natural positive affinity to metal surfaces and are completely dispersed to assure effectiveness during the lubricant's full working life.

The viscosity of Molub-Alloy GM 170W/680 is within the range of ISO VG 680, SAE 140, and AGMA 8 Comp.specifications.

Load carrying capabilities are inherent in the Molub-Alloy GM formulation which is non corrosive to all ferrous and nonferrous metals. Rust and oxidation inhibiting characteristics are maximized to afford effective rust protection and long life of the oil. Foaming is controlled by the use of special components and inhibitors

Application Of Castrol Molub-Alloy GM 170W/680

Molub-Alloy GM gear oil 170W is a special lubricant developed specifically for enclosed worm gear drives, where a hardened steel worm typically meshes with a bronze gear.

Application methods are by dip, spray mist, automatic dispensing equipment, central oiling or circulating systems, or by filling the worm gear housing.

Advantages Of Molub-Alloy GM 170W/680

  • Reduced friction, most evident under boundary conditions, is directly attributed to the presence of specially compounded lubricating solids. This benefit is most pronounced where frequent start-up, slow speeds, and high and unexpected loads are encountered.
  • The establishment of a protective layer of Molub-Alloy GM solids provides substantial increase in the working life of both parts and lubricant. This increases load bearing area which can reduce unit pressures operating temperatures, and wear.
  • Realistic energy savings are possible through a reduction in peak power demand during cold start-up.
  • Seal leakage is greatly reduced. Only compatible base oils that control rubber swelling tendencies are used. The Molub-Alloy GM solids lubricate and improve seal contact surfaces.
  • Overall savings are derived from the above and result from less labour and downtime, smoother, more efficient operation with longer parts life, and extended lubrication cycles

Additional Information Of