Molub-Alloy OG 8031/6000-00 Castrol
Molub-Alloy OG 8031/6000-00 :
CastroI Molub-Alloy OG 8031/6000 is a high viscosity gel formulated lubricant designed to lubricate large heavily loaded open gears. The gel technology adds body to the base fluid to form an ultra-high viscosity lubricant (@ 40ºC/ 104ºF 10,200 mm2/s approx.) to withstand heavy loads and cushions shock loadings commonly found in open gear applications.
A proprietary blend of Molub-Alloy solids working synergistically with chemical reactive extreme pressure (EP) and anti- wear (AW) additives combine to reduce contact temperatures and wear while providing excellent anti-weld protection under extreme pressure and shock loading.
The thixotropic nature of Molub-Alloy OG 8031 allows friction to be reduced to a minimum and aids in its ability to be applied by standard spray systems or used in splash or idler immersion systems.
Once applied to the gear surface the Molub-Alloy OG 8031 forms a thick tenacious semi-transparent film on the gear tooth that can be inspected by strobe light during operations.
Molub-Alloy™ OG 8031/6000 has a good pumpability properties at lower temperatures compared to other grades within the range.
Application Of Castrol Molub-Alloy OG 8031/6000-00
Molub-AIIoy OG 8031 is designed to lubricate heavily loaded, low speed open gears, screw type actuators, and low to moderate velocity bushings and bearings operating in the most severely loaded applications equipped with centralised or sump type lubrication systems.
This range is recommended for use in open gear applications in cement, mining and any other industries requiring anti- scuff and anti-wear protection, and where no product build up is desired. It is also suited for units containing bushings, bearings and/or gears where straight fluid lubricants can leak out.
Advantages Of Molub-Alloy OG 8031/6000-00
- Formulated to minimise distribution line plugging tendency – minimises the potential for eventual plugging of the lubricant distribution lines commonly associated with conventional greases
- Readily pumpable and slumpable for good lubricant distribution – good lubricant distribution in enclosed and semi-enclosed applications, and drainable for ease of removal from surrounding guards
- Specifically formulated to flush contaminants from gear and pinion flanks, and to resist accumulation in the roots of gear teeth
- Highly thixotropic – exhibits a stable form at rest but becomes a fluid when agitated therefore will not run off the gear teeth. However, it will still spread easily and evenly since the gel-like lubricant liquefies when pressure is applied, carrying away both heat and contaminants
- Formulated to address environmental concerns - free of solvents, lead, antimony and barium
Typical Characteristics Of Molub-Alloy OG 8031/6000-00
| Name | Method | Units | Molub-Alloy OG 8031/6000 |
|---|---|---|---|
| Appearance | Visual | - | Dark and Opaque |
| Thickner Type | - | - | Inorganic |
| Base Oil Type | - | - | Mineral |
| Consistency | ISO 2137/ ASTM D217 | NLGI | 0 |
| Density @ 20ºC/68ºF | ASTM D 1475 | - | 0.942 |
| Base Fluid Flash Point | ASTM D92/ ISO 2592 | °C/°F | 232/450 |
| Worked Penetration, 60 Strokes @ 25ºC/77ºF | ASTM D217/ ISO 2137 | 0.1 mm | 400-430 |
| Product Viscosity @ 40ºC/104ºF DSR* | DIN EN 13702 | mm²/s approx | 10193 |
| Product Viscosity @ 100ºC/212ºF DSR* | DIN EN 13702 | mm²/s approx | 1102 |
| Base Oil Viscosity @ 40ºC/104ºF | ASTM D445 ISO 3104 | mm²/s | 6000 |
| Copper Corrosion, 24 hrs, 100ºC/212ºF | ASTM D4048 ISO 2160 | Rating | 1b |
| Four Ball EP Test Load Wear Index | ASTM D2596 | kg | 70 |
| Four Ball EP Test Weld Load | ASTM D2596 | kg | 800 |
| Brookfield Viscosity | - | cP | 48,000 |
| Spindle No. 7, 10 rpm @ 25ºC/77ºF | |||
| FZG Test, A/2.76/50 Method, Failure Stage | DIN 51354 | Rating | >12 |
| Pumpability by Lincoln Ventmeter @ -1ºC/30ºF | |||
| @ -7ºC/20ºF @ -12ºC/10ºF | 200 | ||
| US Steel | psi | 380 | |
| 790 |
If you wish to buy Molub-Alloy OG 8031/6000-00 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy OG 8031/6000-00, Castrol in India
We can give you the best cost prices to buy Molub-Alloy OG 8031/6000-00compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Open Gear Lubricant Molub-Alloy OG 8031/6000-00, Castrol in India
We can also ship Molub-Alloy OG 8031/6000-00 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
