Molub-Alloy Paste PU Castrol
Molub-Alloy Paste PU :
MOLUB-ALLOY PASTE PU (previously named Optimol Paste PU) is especially suited for sliding points exposed to high loads and temperatures. The synthetic carrier liquid evaporates at a temperature of about + 200°C/+ 392°F leaving a dry sliding film of solid lubricants that contains MoS2. It provides a reliable lubrication of the friction partners up to temperatures of + 600°C/+ 1112°F. MOLUB-ALLOY PASTE PU is usually also suited for components which are not resistant to mineral oils.
Application Of Castrol Molub-Alloy Paste PU
- Multiple applications in the high-temperature range in brickworks, bakeries, iron and steel works and the ceramics industry - in ovens, kilns and furnace carriages - at hot transport chains and rollers - in sliding bearings and - converters.
- Also for components which are not resistant to mineral oil and which tend to swell e.g. rubber and leather.
- Temperature application range: - 30°C/- 22°F to + 400°C/+ 752°F (+ 600°C/+ 1112°F if hermetically sealed)
Advantages Of Molub-Alloy Paste PU
- Wide application range at high temperatures
- Immediate lubricating effect
- Excellent emergency running properties due to especially selected solid lubricants
- Optimum wear protection
- Extreme load carrying capacity
- Extraordinarily low coefficient of friction
- Anti-corrosive
- Good adhesion
- Economical use
Additional Information Of Molub-Alloy Paste PU
Clean surface. Apply a thin and even layer of MOLUB-ALLOY PASTE PU with a brush or a lintfree cloth. Remove excess paste.
Typical Characteristics Of Molub-Alloy Paste PU
| Name | Method | Units | Molub-Alloy Paste PU |
|---|---|---|---|
| Colour | Visual | - | Black |
| Base oil | - | - | solid lubricants / polyglycol |
| Worked Penetration (60 strokes @ 25°C / 77°F) | ASTM D217 / ISO 2137 | 0.1 mm | 265-295 |
| Density @ 20°C / 68°F | Inhouse method | kg/m³ | 1600 |
| Base Oil Viscosity @ 40°C / 104°F | ASTM D445 / ISO 3104 | mm²/s | 64 |
| Water Resistance | DIN 51807-1 | Rating | 0 |
| Four Ball Wear test - Weld Load | DIN 51350-4 | N | 4200 |
| Press fit friction test | - | Dyn. coefficient of friction / Vibration | 0.134 / No |
If you wish to buy Molub-Alloy Paste PU of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Molub-Alloy Paste PU, Castrol in India
We can give you the best cost prices to buy Molub-Alloy Paste PUcompared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Black High-Temperature Paste With MoS2 Molub-Alloy Paste PU, Castrol in India
We can also ship Molub-Alloy Paste PU to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
