Omala S4 Wheel 680 Shell
Omala S4 Wheel 680 :
Shell Omala S4 Wheel is an advanced synthetic heavy duty industrial gear oil offering outstanding lubrication performance under severe operating conditions, including improved energy efficiency and long service life. It is recommended specifically for use in General Electric Off-Highway Motorized Wheels fitted to haul trucks used in mining applications.
- Extra protection
- Geared Wheel Hub applications
Previous Name: Shell Hyperia S
Performance, Features & Benefits Of Shell Omala S4 Wheel 680
- Long oil life - maintenance saving
Shell Omala S4 Wheel is formulated to resist chemical and thermal breakdown and to resist the formation of harmful oxidation products at high operating temperatures to help maintain system cleanliness over extended maintenance intervals.
Shell Omala S4 Wheel offers the potential to significantly extend service intervals compared to conventional gear
oils. - Excellent wear and corrosion protection
Shell Omala S4 Wheel provides high levels of load carrying capacity even under shock loading conditions giving superior protection compared to mineral oil-based products in terms of gear and bearing component life.
Shell Omala S4 Wheel also provides outstanding rust and
corrosion protection of all metal surfaces. - Enhanced system efficiency
Shell Omala S4 Wheel can help maintain or enhance the efficiency of gear systems through improved low temperature performance. This provides better lubrication at low start-up temperatures.
Shell Omala S4 Wheel also has excellent water shedding and air release properties helping it maintain critical oil films and efficient lubrication.
Main Applications Of Omala S4 Wheel 680
- Proven performance in off-highway applications
Shell Omala S4 Wheel has a long history of use in severe
off-highway applications and extreme climates. Its advanced, synthetic formulation meets the requirements of major equipment builders such as General Electric, Komatsu, Euclid-Hitachi and Liebherr. - Approved for use in GE and Hitachi motorised wheel hubs
Specially suitable for the gearcases of General Electric and Hitachi motorised wheels fitted to haul trucks used in mining
applications. - Enclosed industrial gear systems
For use in enclosed industrial reduction gear systems
operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations. - Other applications
Shell Omala S4 Wheel oils are suitable for lubrication of
bearings and other components in circulating and splash- lubricated systems.
For highly-loaded worm drives the Shell Omala “W” series oils are recommended.
For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.
Specifications, Approvals & Recommendations Of Omala S4 Wheel 680
- David Brown S1.53.106H
- US Steel 224
- DIN 51517-3 (CLP)
- Approved by GE under GEK-30375H against the following :
ISO 220 GE Specification D50E35B ISO 320 GE Specification D50E35C ISO 460 GE Specification D50E35D ISO 680 GE Specification D50E35E
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.
Compatibility & Miscibility
- Seal & Paint Compatibility
Shell Omala S4 Wheel is compatible with all seal materials
and paints normally specified for use with mineral oils. - Change-over Procedure
Shell Omala S4 Wheel is based on advanced synthetic base fluids and is compatible with petroleum mineral oils - no special changeover procedure is necessary.
However, to achieve the complete benefit of Shell Omala S4 Wheel it should not be mixed with other oils. It is also advisable to ensure that oil systems are clean and free from contamination.
Typical Physical Characteristics Of Omala S4 Wheel 680
| Properties | Method | Shell Omala S4 Wheel 680 | ||
|---|---|---|---|---|
| Kinematic Viscosity | @400C | mm2/s | ISO 3104 | 680 |
| Kinematic Viscosity | @1000C | mm2/s | ISO 3104 | 61 |
| Viscosity Index | ISO 2909 | 157 | ||
| Flash Point (COC) | 0C | ISO 2592 | 274 | |
| Pour Point | 0C | ISO 3016 | -43 | |
| Density | @150C | kg/m3 | ISO 12185 | 860.7 |
| FZG Load Carrying Test | failure load stage minimum | DIN 51354-2 A/8.3/90 | 12 | |
| Timken OK Load | lbs minimum | ASTM D2782 | 80 |
If you wish to buy Omala S4 Wheel 680 of Shell from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
Omala S4 Wheel 680, Shell in India
We can give you the best cost prices to buy Omala S4 Wheel 680 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Advanced Synthetic Industrial Gear Oil Omala S4 Wheel 680, Shell in India
We can also ship Omala S4 Wheel 680 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.
