Optigear BM 100 Castrol

Optigear BM 100 :

Castrol Optigear BM is a range of high-performance extreme pressure gear oils, developed to tackle wear-related problems in heavily loaded industrial gears and bearings.

Optigear BM is formulated with Castrol's Microflux Trans (MFT) Plastic Deformation (PD) additive. MFT PD helps improve performance when operating temperature and loads reach a certain level of activation energy, by enabling the micro- smoothing of surface roughness without increasing wear. The smoothed surface delivers optimum wear protection and an extremely low coefficient of friction, especially in applications which experience extreme pressure, shock loads, vibrations or low speeds. MFT PD helps to protect against scuffing and shock loading, while maintaining a high load carrying capacity, and can help prevent the progression of micro-pitting in pre-damaged gears.
Specific grades within the Optigear BM range meet the requirements of DIN 51517 part 3 CLP and the requirements of a wide range of industrial bodies and equipment manufacturers. Oils are formulated with detergent additives.
Optigear BM 68 and BM 220 are also classified as CGLP oils (DIN 51502).

Application Of Castrol Optigear BM 100

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions.
Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading.
Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Advantages Of Optigear BM 100

Compared to conventional non-PD oils, Castrol Optigear BM can deliver the following advantages:

  • Tests have shown a reduction in the coefficient of friction of up to 60% over conventional oils without PD technology¹ which can deliver energy savings, lower lubricant and component temperatures and improve operational efficiency
  • In laboratory tests Castrol PD additives were shown to prevent the progression of micro-pitting in pre-damaged gears. Non-PD oils used in pre-damaged gears showed existing wear levels increased up to three times²
  • Smoothing existing gear damage reduces the cost of repairs and replacements and improves operating efficiency by increasing equipment reliability
  • Friction, heat and vibration are reduced
  • Oil with Castrol PD additives provides superior protection with wear levels of less than half those observed in tests with conventional non-PD oil³ to help extend planned gear and bearing life
  • Extended lubricant service life and relubrication intervals can help to reduce costs and waste oil disposal
  • Full load operation is achieved in a short time, virtually eliminating the running-in period
  • Optigear BM 68 and BM 220 CGLP slideway oils. (Subject to metalworking fluid compatibility check).
Typical Characteristics Of Optigear BM 100
Name Method Units 68 100 150 220 320 460 680 1000 1500 3000
Colour visual - brown brown brown brown brown brown brown brown brown brown
ISO Viscosity Group - - 68 100 150 220 320 460 680 1000 1500 3000
Density @ 15°C / 59°F ISO 12185 / ASTM D4052 kg/m³ 890 895 900 905 910 910 920 930 930 930
Kinematic Viscosity @ 40°C / 104°F ISO 3104 / ASTM D445 mm²/s 68 100 150 220 320 460 680 1000 1500 3000
Kinematic Viscosity @ 100°C / 212°F ISO 3104 / ASTM D445 mm²/s 9.1 11.7 15 19.4 24.9 31.8 38.3 47.4 64.2 119.8
Viscosity Index ISO 2909 / ASTM D2270 - 110 105 100 100 100 100 93 90 95 110
Flash Point - open cup method ISO 2592 / ASTM D92 °C 220 220 225 230 235 240 245 250 235 220
°F 428 428 437 446 455 464 473 482 455 428
Pour Point ISO 3016 / ASTM D97 °C -24 -21 -18 -15 -15 -12 -9 -9 -3 0
°F -11 -6 0 5 5 10 16 16 27 32
Copper corrosion (3 h @100°C/212°F) ISO 2160 / ASTM D130 Rating 1 1 1 1 1 1 1 1 1 1
Rust test - distilled water (24 hrs) ISO 7120 / ASTM D665A - Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass
Rust test - synthetic seawater (24 hrs) ISO 7120 / ASTM D665B - Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass
FZG Gear Scuffing test - A/8.3/90 ISO 14635-1 Failure Load Stage 12 12* >12 14 14* 14* 14* 14* 14* 14*
FE8 Bearing Wear Test (F.562831.01-7.5/80-80) DIN 51819-3 Roller Wear mw50, mg <5 <5* <5 <5* <5 <5* <5* <5* <5* <5*
FZG Micropitting test @ 60°C/140°F FVA 54-7 Failure Load Stage Micropitting Rating >10
high
FZG Micropitting test @ 90°C/194°F FVA 54-7 Failure Load Stage Micropitting Rating >10 >10
high high

If you wish to buy Optigear BM 100 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.

Optigear BM 100, Castrol in India
We can give you the best cost prices to buy Optigear BM 100compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

High Performance Gear Oils Optigear BM 100, Castrol in India
We can also ship Optigear BM 100 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card