Optigear Synthetic 800/680 Castrol
Optigear Synthetic 800/680 :
Castrol Optigear Synthetic 800 Range (previously called Tribol? 800) synthetic gear oils have been developed for the lubrication of heavily loaded gears, bushings and bearings which may operate over a broad range of temperatures from ambient to elevated temperatures (>80?C/176?F). They are particularly intended to extend the service life of both lubricant and machine parts where unusually high operating and oil reservoir temperatures are encountered. The high performance characteristics of Optigear Synthetic 800 are achieved with select polyalkyleneglycol (PAG) based synthetic fluids. They feature chemical and thermal stability, high viscosity index, water solubility, and compatibility with metals and elastomers most commonly used in machine construction. The naturally high resistance to oxidation of the synthetic base fluid is further enhanced by inhibitors. Corrosion protection is very effective even in the presence of water. Also, a package of high performance additives acts in combination for superior anti-wear and Extreme Pressure (EP) performance.
Application Of Castrol Optigear Synthetic 800/680
The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.
Advantages Of Optigear Synthetic 800/680
- Shear stability - the synthetic base offers high viscosity index (VI) without the addition of VI improvers. In service, VI improvers can shear, lowering oil viscosity and reducing protection critical for gear sets and bearings. The naturally high VI of Castrol Optigear Synthetic 800 assures full protection for components over a wide range of operating temperatures, speeds, and load conditions.
- Long life, extended drain intervals are possible because of the natural aging and oxidation resistance of the synthetic base fluid. Advanced Castrol Optigear Synthetic lubrication technology forms friction-fighting, anti-wear films that can significantly reduce local operating temperatures as gear teeth or bearing surfaces come into contact
- More protection for components in severe service. The extended EP performance of Optigear Synthetic 800 offers protection beyond the capabilities of conventional petroleum oils.
- Wear protection under conditions of extreme temperature fluctuation and high loads.
- High efficiency and lower oil temperature, especially in worm gear units.
- High corrosion protection of cast and steel surfaces through special additive packages, even in the presence of water.
- Compatibility with non-ferrous metals through well-formulated synergistic additives.
- Potential energy savings as a result of a lower coefficient of friction.
- Reduction of maintenance costs as a result of significantly increased life of the lubricant
Additional Information Of Optigear Synthetic 800/680
Optigear Synthetic 800 synthetic gear oils are water soluble, so spills may be cleaned up with water. They are NOT compatible with mineral (petroleum) based lubricants. Condensation water may be absorbed without the damage of corrosion or a change in viscosity. Cleaning lubrication systems with a flushing oil or Optigear Synthetic 800 prior to the first filling is recommended. To achieve long drain cycles and obtain the economic advantages, systems must be free of contaminants. The Optigear Synthetic 800 range is compatible with most seals including Viton A and nitrile or Buna N (NBR). 800’s are NOT compatible with neoprene (polychloroprene) and butadiene seals - mixed polymers, stryenebutadienes, polystyrene, or methacrylates.
Typical Characteristics Of Optigear Synthetic 800/680
| Name | Method | Units | 100 | 150 | 220 | 320 | 460 | 680 | 1000 | 1500 | 2200 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ISO Viscosity Grade | - | - | 100 | 150 | 220 | 320 | 460 | 680 | 1000 | 1500 | 2200 |
| AGMA NUMBER | - | - | 3EP | 4EP | 5EP | 6EP | 7EP | 8EP | 8EP | - | - |
| Density @ 15°C / 59°F | ASTM D4052 | kg/m³ | 1050 | 1060 | 1070 | 1074 | 1075 | 1070 | 1065 | 1060 | 1060 |
| / ISO 12185 | |||||||||||
| Kinematic Viscosity @ 40°C / 104°F | ASTM D445 / ISO 3104 | mm²/s | 100 | 150 | 220 | 320 | 460 | 680 | 1000 | 1500 | 2200 |
| Kinematic Viscosity @ 100°C / 212°F | ASTM D445 / ISO 3104 | mm²/s | 18 | 26 | 34 | 50 | 72 | 102 | 155 | 230 | 350 |
| Viscosity Index | ASTM D2270 | - | 205 | 210 | 215 | 230 | 240 | 250 | 275 | 290 | 320 |
| / ISO 2909 | |||||||||||
| Pour Point | ASTM D97 / ISO 3016 | °C/°F | -45 / | -36 / | -33 / | -30 / | -30 / | -27 / | -24 / | -12 / | -14 / |
| -49 | -33 | -27 | -22 | -22 | -17 | -11 | 10 | 7 | |||
| Flash Point - open cup method | ASTM D92 / ISO 2592 | °C/°F | 280 / | 280 / | 290 / | 290 / | 290 / | 290 / | 390 / | 290 / | 271 / |
| 536 | 536 | 554 | 554 | 554 | 554 | 554 | 554 | 520 | |||
| Copper corrosion (3 hrs@100°C/212°F) | ASTM D130 / ISO 2160 | Rating | 1a | 1a | 1a | 1a | 1a | 1a | 1a | 1a | 1a |
| Rust test - distilled water (24 hrs) | ASTM D665A | - | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| / ISO 7120 | |||||||||||
| Four Ball Wear test - Wear Scar Diameter (300N / 1 hr) | DIN 51350- 3B | mm | 0.27 | 0.27 | 0.27 | 0.27 | 0.27 | 0.27 | 0.27 | 0.27 | 0.27 |
| FZG Gear Scuffing test - A/ 8.3/90 | Failure Load Stage | ||||||||||
| ISO 14635-1 | >12 | >12 | >12 | >12 | >12 | >12 | >12 | >12 | >12 | ||
| FZG Micropitting test @ 60°C/140°F | Failure Load Stage | ||||||||||
| FVA 54-7 | - | - | >10 | >10 | >10 | >10 | >10 | >10 | >10 | ||
| Foam Sequence I - tendency / stability | ASTM D892 / ISO 6247 | ml/ml | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 |
If you wish to buy Optigear Synthetic 800/680 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Optigear Synthetic 800/680, Castrol in India
We can give you the best cost prices to buy Optigear Synthetic 800/680compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Synthetic Gear Oils
We can also ship Optigear Synthetic 800/680 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.