Perfecto T 68 Castrol
Perfecto T 68 :
The Castrol Perfecto T range of turbine oils is formulated from highly refined mineral base stocks together with rust and oxidation additives to extend their inherent oxidation stability and corrosion protection.
Application Of Castrol Perfecto T 68
The Perfecto T range is primarily intended for the lubrication of steam turbines because of its resistance to foaming, demulsification performance and its air release properties. It can also be used in lightly loaded industrial gas turbines where anti wear performance is not required and turbo machinery where hydrodynamic lubrication prevails.
Specific Grades within the Perfecto T range meet or exceed the requirements of
- BS 489 1999
- DIN 51515 Part 1( L-TD)
- General Electric GEK
28143A
46506E - Siemens TLV 9013 04
Advantages Of Perfecto T 68
- Extensive performance history
- Low foaming tendency and air release properties
- Good demulsibility and corrosion inhibition performance
Storage Of Perfecto T 68
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60oC, exposed to hot sun or freezing conditions.
Typical Characteristics Of Perfecto T 68
| Name | Method | Units | Perfecto T 32 | Perfecto T 46 | Perfecto T 68 | Perfecto T 100 |
|---|---|---|---|---|---|---|
| Kinematic Viscosity @ 40°C | ISO 3104 / ASTM D445 | mm2/s | 32 | 46 | 68 | 100 |
| Kinematic Viscosity @t 100°C | ISO 3104 / ASTM D445 | mm2/s | 5.3 | 6.7 | 8.6 | 10.8 |
| Viscosity Index | ISO 2909 / ASTM D2270 | - | 102 | 102 | 102 | 97 |
| Density @ 15°C | ISO 12185 / ASTM D4052 | kg/m3 | 874 | 877 | 881 | 882 |
| Pour Point | ISO 3016 / ASTM D97 | °C | -12 | -12 | -12 | -12 |
| Flash Point - Closed cup method | ISO 2719 / ASTM D93 | °C | 216 | 220 | 230 | 230 |
| Acid Number | ISO 6619 / ASTM D664 | mgKOH/ g | 0.1 | 0.1 | 0.1 | 0.1 |
| Air Release at 50°C | ISO 9120 / | min | 3 | 4 | 5 | 8 |
| ASTM 3427 | ||||||
| Demulsification | IP 19 | seconds | 60 | 60 | 90 | 90 |
| Foam Sequence I - tendency / stability | ISO 6247 / ASTM D892 | ml | Oct-00 | Oct-00 | 20/0 | 20/0 |
| Foam Sequence II - tendency / stability | ISO 6247 / ASTM D892 | ml | 0/0 | 0/0 | 0/0 | Oct-00 |
| Foam Sequence III - tendency / stability | ISO 6247 / ASTM D892 | ml | Oct-00 | Oct-00 | 20/0 | 20/0 |
| Rust test - distilled water (24 hrs) | ISO 7120 / ASTM D665A | - | Pass | Pass | Pass | Pass |
| Rust test - synthetic sea water (24 hrs) | ISO 7120 / ASTM D665B | - | Pass | Pass | Pass | Pass |
| Copper Corrosion (3hrs at 100°C) | ISO 2160 / ASTM D130 | - | 1A | 1A | 1A | 1A |
| Oxidation Stability - RPVOT | ASTM D2272 | min | 450 | 450 | 450 | 450 |
| Oxidation Stability - TOST | ISO 4263-1 / ASTM D943 | hrs | 4000 | 4000 | 4000 | 4000 |
If you wish to buy Perfecto T 68 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
Perfecto T 68, Castrol in India
We can give you the best cost prices to buy Perfecto T 68 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Turbine Oils Perfecto T 68, Castrol in India
We can also ship Perfecto T 68 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.
