Steel 320 HPCL
Steel 320 :
Meets specifications:
HP STEEL Grades meet the requirements of bearing lubricant specified by MORGAN CONSTRUCTION CO., USA. These oils meet the performance requirements of IS: 6552-1987 and IPSS: 1-09-001-97
Special Features Of HPCL Steel 320
HP STEEL Grades are premium quality heavy duty bearing and circulating oil. They have high viscosity index with superior oxidation and thermal stability. They meet the requirement of high demulsibility, low foaming, excellent rust protection and good film strength property to minimize wear in roll-neck bearings of steel mills.
HP STEEL Grades are blended from high quality paraffinic base oils having a high chemical stability. The quality of the oil is further enhanced by the presence of selected grades of anti-oxidants, anti-rust, demulsifier and defoamants. These oils are suitable for use in bearings under critical conditions of exposure to water at high pressure and extreme load conditions. These products have good wettability and high film strength providing extra rust protection and eliminate scuffing and scoring of the bearing.
Application Area Of Steel 320
These oils are suitable for use in the Morgan Bearings of Steel Mills. Morgan Bearings are used in the Plate Mill, Wire Rod Mill, Merchant Mill, Blooming and Billet Mill, and Rail & Structural Mill. The oils are also recommended for those places where the bearings are under heavy load and in the presence of water
Typical Physical Characteristics Of Steel 320
| Appearance | Bright & Clear |
|---|---|
| Acidity, Inorganic, mg KOH/g | Nil |
| Acidity, Total, mg KOH/g | <0.25 |
| Carbon Residue,Conradson % Wt | <0.20 |
| Colour, ASTM | <4.5 |
| Copper Strip, Corrosion, At 100°C For 3 Hrs | 1 |
| Density @ 29.5°C, g/cc | 0.894 |
| Emulsion Characteristics At 82°C, In 20 Minutes, ml | 40-37-3 |
| Emulsion Characteristics, Water, ml | 36 |
| Flash Point, COC, °C | >226 |
| Foam Tendency/Stability, ml | |
| Sequence I | 30/Nil |
| Sequence II | 0/Nil |
| Sequence III | 30/Nil |
| FZG Rig Test (A/8.3/90), FLS | >5 |
| Pour Point, °C | -6 |
| Rusting Test | |
| 24 Hrs, Distilled Water | Pass |
| 24 Hrs With Synthetic Sea Water | Pass |
| Kin. Viscosity @ 40°C, cSt | 315-330 |
| Kin. Viscosity @ 100°C, cSt | 20.8 |
| Viscosity Index | >95 |
| Four Ball Weld Load, kg | >100 |
If you wish to buy Steel 320 of HPCL from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
Steel 320, HPCL in India
We can give you the best cost prices to buy Steel 320 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Bearing Oils For Steel Plants Steel 320, HPCL in India
We can also ship Steel 320 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.
