Tribol 1710 /460 Castrol
Tribol 1710 /460 :
Castrol Tribol 1710 gear oils are a range of high-performance extreme pressure gear oils, developed to help tackle wear-related problems in heavily loaded industrial gears and bearings. Tribol 1710 is formulated with Castrol's Tribol Gear Oil Addivtive (TGOA) Plastic Deformation (PD) additive and the high quality mineral base oils and synthetic polyalphaolefins.
TGOA PD helps improve lubricant performance when operating temperature and loads reach a certain level of activation energy, by enabling the micro-smoothing of surface roughness without increasing wear. The smoothed surface delivers optimum wear protection and an extremely low coefficient of friction, especially in applications which experience extreme pressure, shock loads, vibrations or low speeds. TGOA PD helps to protect against scuffing and shock loading, while maintaining a high load carrying capacity, and can help prevent the progression of micro-pitting in pre-damaged gears.
Application Of Castrol Tribol 1710 /460
Typical applications are in spur, helical, herringbone, bevel and planetary gears as well as in geared couplings, rolling and sliding bearings and in gear drive circulating systems.
Depending on the application Tribol 1710 may be used in a temperature range from –30°C up to +95°C (refer to a Castrol technician for more guidance, if necessary).
Tribol 1710 semi-synthetic gear oils are compatible with most mineral oil, ester and synthetic based products. This means that traces up to 3% of previous oil in the gear case after draining will not pose any problems. However, the beneficial effects of the TGOA additives are reduced, when Tribol 1710 oils are mixed with other gear oils. Tribol 1710 oils are not compatible with polyglycols. After draining a polyglycol fill, the gear case must be flushed well with a mineral oil or flushing oil.
Tribol 1710 are CLP-HC gear oils (DIN 51502) and exceed minimum requirements according to DIN 51517 T.3 for ISO 320 and 460 grades.
Advantages Of Tribol 1710 /460
Tribol 1710 has the following advantages when compared to conventional gear oils (of similar class) :-
- High load carrying capacity as demonstrated in Load stage >14 being passed in the FZG test (for ISO 320 and above).
- Exellent wear prevention as demostrated in the FZG micropitting test (for ISO 220 and above).
- Running-in pitting is prevented or stopped, unless caused by poor design or heavy overloading of the gears.
- Lapping of gears is no longer necessary.
- Previous pitting or damaged surfaces can be stopped or visibily reduced.
- Lower operating temperature and noise level.
- Extended service life of gears and bearings, which helps to reduce maintenance costs.
- High viscosity-index allows start-ups at low temperatures due to the lower viscosity and allows build-up of a lubricant film with sufficient thickness at high temperatures.
Typical Characteristics Of Tribol 1710 /460
| Name | Method | Units | Tribol 1710/100 | Tribol 1710/220 | Tribol 1710/320 | Tribol 1710/460 |
|---|---|---|---|---|---|---|
| ISO Viscosity Grade | - | - | 100 | 220 | 320 | 460 |
| Density @ 15°C / 59°F | ISO 12185 / ASTM D4052 | kg/m³ | 861 | 865 | 875 | 874 |
| Kinematic Viscosity @ 40°C / 104°F | ISO 3104 / ASTM D445 | mm²/s | 100 | 220 | 320 | 460 |
| Kinematic Viscosity @ 100°C / 212°F | ISO 3104 / ASTM D445 | mm²/s | 13,7 | 24,3 | 31.2 | 42.4 |
| Viscosity Index | ISO 2909 / ASTM D2270 | - | 138 | 138 | 138 | 140 |
| Flash Point - open cup method | ISO 2592 / ASTM D92 | °C/°F | >220/428 | >240/464 | >240/464 | >240/464 |
| Pour Point | ISO 3016 / ASTM D97 | °C/°F | 1.097560976 | 1.204379562 | 1.363636364 | 1.363636364 |
| Rust test - distilled water (24 hrs) | ISO 7120 / ASTM D665A | - | pass | pass | pass | pass |
| Copper corrosion (3 hrs@100°C/212°F) | ISO 2160 / ASTM D130 | Rating | 1 | 1 | 1 | 1 |
| FZG Gear Scuffing test - A/ 8.3/90 | ISO 14635-1 | Failure Load Stage | - | - | >12 | >12* |
| FZG Gear Scuffing test - A/ 16.6/90 | ISO 14635-1 | Failure Load Stage | - | - | >14 | >14* |
| (modified) | ||||||
| Failure Load Stage / Micropitting rating | ||||||
| FZG Micropitting test @ 90°C/194°F | FVA 54-7 | - | #NAME? | >10/High | >10/High* | |
| * Read up from ISO VG 320 |
If you wish to buy Tribol 1710 /460 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Tribol 1710 /460, Castrol in India
We can give you the best cost prices to buy Tribol 1710 /460compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Semi-Synthetic Gear Oils Tribol 1710 /460, Castrol in India
We can also ship Tribol 1710 /460 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
