Tribol 3020/1000-000 Castrol
Tribol 3020/1000-000 :
Castrol Tribol 3020 is a range of greases formulated from highly refined petroleum base oils, a lithium thickener, and Tribol Grease Oil Additive (TGOA).. The TGOA additive package outperforms all other EP and antiwear additives because of its unique action on Frictional surfaces.
The base oils are high-viscosity mineral oils forming a stable lubricant film to withstand high continuous loads, shock loads and vibrations.
The TGOA additive package is activated by high specific loads and corresponding temperatures causing a chemicalphysical reaction. This results in an equalization of surface roughness without creating abrasion.
The results of the TGOA additives can be compared with a rolling process in the micro-range. The surface roughnesses are gradually leveled and smoothed.
Through smoothing of the working surfaces, the loads are distributed over increasing areas and the actual load carrying areas are enlarged. During the running-in process, the TGOA additive package creates an optimum of smooth contact surfaces. If, because of shock loads, or stop-and-go operation, surface roughness peaks redevelop, the TGOA additives are automatically reactivated. Surface roughness is again equalized and lubrication optimized.
Corrosion and oxidation inhibitors help maximize effective rust protection and long life of the grease.Tribol 3020 meet NLGI consistency grades commonly available for these types of lubricants.
Application Of Castrol Tribol 3020/1000-000
Typical applications for Castrol Tribol 3020 greases are non-oil-tight gear units, rolling and sliding bearings, bushings, slides and general lubrication designed for fluid-grease lubrication.
Applications include large slow-speed bearings where the Castrol Tribol 3020 greases provide for a sufficient lubricating film due to theirhigh base oil viscosity.
Operating temperatures can range from –40?C to +120?C depending on NLGI grades.
Advantages Of Tribol 3020/1000-000
Compared to conventional greases provides the following advantages:
- Excellent pumpability in central lubrication systems.
- Repairing of damaged friction surfaces (roughness) due to the TGOA additives.
- Extended lubrication interval.
- Reduced wear and noise.
- Lowering of the operating temperatures.
- Low downtime thus reducing maintenance and repair costs.
- Due to their excellent adhesion, these greases offer an optimum sealing effect.
Additional Information Of Tribol 3020/1000-000
Castrol Tribol 3020 should not be mixed with greases using a different thickener. Application may be made manually with grease guns or automatic dispensing systems, designed for the respective NLGI grades.
Typical Characteristics Of Tribol 3020/1000-000
| Tribol 3020/ | Tribol 3020/ | Tribol 3020/ | Tribol 3020/ 1000-00 | Tribol 3020/ 1000-000 | |||
|---|---|---|---|---|---|---|---|
| Name | Method | Units | 1000-2 | 1000-1 | 1000-0 | ||
| Appearance | Visual | - | homogeneous | ||||
| Thickener Type | - | - | Lithium | Lithium | Lithium | Lithium | Lithium |
| Base Oil | - | - | Mineral Oil | Mineral Oil | Mineral Oil | Mineral Oil | Mineral Oil |
| Consistency | ISO 2137/ ASTM D217 | NLGI | 2 | 1 | 0 | 0 | 0 |
| Grade | |||||||
| Worked Penetration (60 Strokes @25°C/77°F) | ISO 2137/ ASTM D217 | 1/10 mm | 265-295 | 310-340 | 355-385 | 400-430 | 445-475 |
| Dropping Point, Grease | ISO 2176/ ASTM D566 | °C/°F | > 175 / > 350 | > 175 / > 350 | > 160 / > 320 | - | - |
| Base Oil Viscosity @ 40°C/ 104°F | ISO 3104/ ASTM D445 | mm²/s | 1000 | 1000 | 1000 | 1000 | 1000 |
| Base Oil Viscosity @ 100°C/ 212°F | ISO 3104/ ASTM D445 | mm²/s | 54 | 54 | 54 | 54 | 54 |
| Rust Test (distilled water) | ASTM D1743 | Rating | Pass | Pass | Pass | Pass | Pass |
| Rust Test - EMCOR (distilled water) | DIN 51802 | Rating | ≤ 0/1 | ≤ 0/1 | ≤ 0/1 | ≤ 0/1 | ≤ 0/1 |
| Copper Corrosion (24 hrs,100°C /212°F) | ASTM D4048 | Rating | 1B | 1B | 1B | 1B | 1B |
| Four Ball Wear test - Wear Scar Diameter | DIN 51350- 05E | mm | < 1.0 | < 1.0 | < 1.0 | < 1.0 | < 1.0 |
| Four Ball Weld Load test - Weld Point | DIN 51350-4A | N | 3600/ | 3600/ | 3600/ | 3600/3800 | 3600/3800 |
| 3800 | 3800 | 3800 | |||||
| SRV Friction and Wear test (300 N / 2hr / 50ºC) | ASTM D5707 | coeff. of friction | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 |
| test not suitable for semi- fluid | test not suitable for semi- fluid | ||||||
| greases | greases | ||||||
| Water Resistance | DIN 51807 | Rating | Jan-90 | Jan-90 | Jan-90 | ||
| test not suitable for semi- fluid | test not suitable for semi- fluid | ||||||
| Roll Stability Test - Shear Stability | greases | greases | |||||
| ASTM D1831 | 1/10 mm | ≤ 10 | ≤ 10 | ≤ 10 | |||
| Flow pressure @ -20°C / - 4°F | DIN 51805 | mbar | 350 | 250 | 100 | - | - |
| Flow pressure @ -35°C / - 31°F | DIN 51805 | mbar | - | - | - | 700 | 500 |
| Oil separation | DIN 51817 | % | ≤ 4 | ≤ 11 | - | - | - |
| Oil separation | ASTM D1742 | % | ≤ 3 | ≤ 3 | - | - | - |
| * Read up from ISO VG 320 |
If you wish to buy Tribol 3020/1000-000 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Tribol 3020/1000-000, Castrol in India
We can give you the best cost prices to buy Tribol 3020/1000-000compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Fluid Greases With TGOA Tribol 3020/1000-000, Castrol in India
We can also ship Tribol 3020/1000-000 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.
