Tribol CH 1421/150 Castrol

Tribol CH 1421/150 :

Castrol Tribol CH 1421 (Previously called Tribol 1421) High Temperature Chain Oils are synthetic, premium quality products formulated for the most demanding high temperature chain applications. They provide a unique combination of extremely low volatility and low residue formation tendency, which allows for reduced lubricant consumption and    improved housekeeping.

Tribol CH 1421/150 supports a fluid film on chain pins over a broad high temperature range and contains anti-wear additives  for additional protection in boundary lubrication from surging loads.

Application Of Castrol Tribol CH 1421/150

Tribol CH 1421/150 High Temperature Chain Oils are designed and most effective for chain operating temperature   applications between 175°C/350°F and 300°C/575°F, maintaining peak performance over the entire temperature range. With more frequent relubrication, Tribol CH 1421 continues to perform at temperatures beyond 300°C/575°F.

Tribol CH 1421/150 High Temperature Chain Oils lubricants are designed for the lubrication of roller chains, slides, cams and general lubrication where a high temperature synthetic lubricant is needed. Major applications include industries using high temperature conveyor systems used for baking, coating, drying and curing. Product application may be achieved by drip, spray, splash and automatic dispensing equipment. Use of an automatic lubrication system is recommended to benefit the most from the use of Castrol Tribol CH 1421.

Advantages Of Tribol CH 1421/150

  • Application rate and frequency can be minimized due to extremely low volatility. Lubricant consumption is minimized.
  • Minimal residue forming tendency and cleansing action virtually eliminates shutdowns for periodic cleaning of equipment.
  • Dissolves and facilitates removal of pre-existing gum, varnish and carbonaceous residues.
  • Dripping and blow-off are minimized by reduced lubricant application requirements.
  • Excellent fluid film and anti-wear properties result in extended chain life and potential for energy reduction.
  • Fire and explosion possibilities are minimized due to extremely low volatility. Safety and environmental conditions are improved.
  • Overall cost reduction is accomplished by extended lubrication cycles, reduced contamination, decreased downtime for maintenance and repair, and longer parts life
User Advice Of Tribol CH 1421/150

Tribol CH 1421/150 Chain Oils are compatible with petroleum and most synthetic based lubricants. Tribol CH 1421/150 can  dissolve hardened chain deposits from the previously used lubricant, however, it is still recommended to clean the chain thoroughly before changeover to Tribol CH 1421. If this is not feasible, run chain through several cycles under no-load conditions when first applying Tribol CH 1421.Tribol CH 1421/150 should not be used around parts containing polycarbonates as it can have a softening effect and it should not be used where neoprene seals are used.

Typical Characteristics Of Tribol CH 1421/150
Name Method Units CH 1421 /
150
Specific Gravity @ 40°C / 104°F ASTM D 1298 - 0.943
Kinematic Viscosity @ 40°C / 104°F ASTM D445 / ISO 3104 mm²/s 150
Kinematic Viscosity @ 100°C / 212°F ASTM D445 / ISO 3104 mm²/s 16.3
Viscosity Index ASTM D2270 / ISO 2909 - 115
Flash Point - open cup method ASTM D92 / ISO 2592 °C/°F 260 / 500
Fire Point ASTM D92 / ISO 2592 °C/°F 299 / 570
Autoignition temperature ASTM E659 °C/°F 400/752
Rust test - distilled water (24 hrs) ASTM D665A / ISO 7120 - Pass
Pour Point ASTM D97 / ISO 3016 °C/°F 0.934782609
Carbon residue - Conradson test ASTM D189 / ISO 6615 %wt 0.08
Falex Pin & Vee Block test - Antiwear properties ASTM D 2670- Teeth Wear (number) 6
10
Four Ball Wear test - Wear Scar Diameter ( 40 kgf / 75°C / 1200 rpm / 1 hr) ASTM D4172 mm 0.39
Evaporation Loss - Noack (TGA Method). Isothermal @ 200°C/392°F, 60 ml/min airflow.
Isothermal @ 225°C/437°F, 60 ml/min airflow.
Isothermal @ 250°C/482°F, 60 ml/min airflow. >10
Isothermal @ 275°C/525°F, 60 ml/min airflow. Time (hours) to 50% remaining >10
ASTM D6375 3.3
1.3

If you wish to buy Tribol CH 1421/150 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.

Tribol CH 1421/150, Castrol in India
We can give you the best cost prices to buy Tribol CH 1421/150compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

Chain Oils Tribol CH 1421/150, Castrol in India
We can also ship Tribol CH 1421/150 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.
Maharashtra,
INDIA.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email : sales@lubeoilcompany.com

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card