Tribol GR SW 1.5 Castrol
Tribol GR SW 1.5 :
Castrol Tribol GR SW 1.5 (previously called Optitemp SW 1) is a lithium based grease containing a synthetic base fluid and premium extreme pressure (EP) additives. The wax-free nature of the synthetic base oil and the low coefficient of traction (compared with mineral oils), provide excellent low temperature pumpability and very low starting and running torque. It can also offer the potential for energy savings and can reduce operating temperatures in the load zone of rolling and sliding element bearings. The lithium complex thickener gives excellent adhesion, structural stability, sealing effects and water resistance. Primarily intended for a wide variety of applications at extremes of temperature, the grease also has a high level of chemical stability and provides excellent protection against wear, rust and corrosion.
Application Of Castrol Tribol GR SW 1.5
Castrol Tribol GR SW 1.5 is recommended for tough industrial applications especially as encountered in Wind Turbine Main Bearings, Yaw bearings and Pitch bearings. It gives outstanding bearing protection under high loads at low to moderate speeds and in applications where water resistance is critical. Castrol Tribol GR SW 1.5 is also recommended for use in steel and paper mills. Recommended operating temperature range is -40°C to 180°C.
Advantages Of Tribol GR SW 1.5
- Reduced downtime and maintenance costs because of reduced wear, rust and corrosion.
- Outstanding high and low temperature performance.
- Extended service life with longer intervals between re-lubrication.
- Reduced energy consumption due to low traction coefficient.
- Ability to perform well in the presence of water
Typical Characteristics Of Tribol GR SW 1.5
Name | Method | Units | Tribol GR SW 1.5 |
---|---|---|---|
Appearance | Visual | - | Homogenous |
Colour | Visual | - | Beige |
Consistency | ISO 2137/ASTM D217 | NLGI grade | 1.5 |
Dropping Point | ISO 2176/ASTM D566 | °C/°F | >260/>500 |
Base Oil Viscosity @ 40 °C/104 °F | ISO 3104/ASTM D445 | mm²/s | 460 |
Base Oil Viscosity @ 100 °C/212 °F | ISO 3104/ASTM D445 | mm²/s | 46 |
Water Wash-out at 60 °C/140 °F | ISO 11009/ASTM D1264 | %wt loss | <5 |
Rust Test - EMCOR (Distilled water) | ISO 11007/ASTM D6138 | Rating | 0/0 |
Rust Test - EMCOR (1 % NaCl solution) | ISO 11007 modified | Rating | 0/0 |
Worked Penetration (60 strokes @ 25 °C/77 °F) | ISO 2137/ASTM D217 | 0.1 mm | 290 - 320 |
Four Ball Weld Load test - Weld Point | ISO 11008/ASTM D2596 | kgf | 315 |
Four Ball Wear test - Wear Scar Diameter (40 kgf/60 °C) | DIN 51350/ASTM D2266 | mm | 0.4 |
Four Ball Wear test - Weld Load | DIN 51350 T4 | N | 2800 |
If you wish to buy Tribol GR SW 1.5 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Tribol GR SW 1.5, Castrol in India
We can give you the best cost prices to buy Tribol GR SW 1.5compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
High Performance Grease for Wind Turbines Tribol GR SW 1.5, Castrol in India
We can also ship Tribol GR SW 1.5 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.