Tribol GR SW 460-1 Castrol

Tribol GR SW 460-1 :

Castrol Tribol GR SW 460-1 is a lithium complex based grease containing a synthetic base fluid working in combination with Castrol’s unique MicroFlux Trans – Plastic Deformation (MFT-PD) additive technology. The waxfree nature of the synthetic base oil and the low coefficient of friction provide excellent low temperature pumpability as well as very low starting and running torque. It can also offer the potential for energy savings and can reduce operating temperatures in the load zone of rolling and sliding element bearings. The lithium complex thickener gives excellent adhesion, structural stability, sealing effects and water resistance. Primarily intended for a wide variety of applications at extremes of temperature, the grease also has a high level of chemical stability and provides excellent protection against wear, rust and corrosion.

The MFT -PD additive technology provides unsurpassed wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds. Under severe load, components of the MFT-PD additive combination are activated, initiating an improvement of surface friction characteristics through plastic deformation. Unlike the case with conventional lubricants, the layer formed by MFT-PD provides excellent lubricity and adhesion. The load carrying area is improved and a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a non-sacrificial micro-smoothing of the friction surfaces.

Application Of Castrol Tribol GR SW 460-1

Tribol GR SW 460-1 is recommended for tough industrial applications especially as encountered in Wind Turbine Main Bearings, Pitch and Yaw Bearings It gives outstanding bearing protection under high loads at low to moderate speeds and in applications where water resistance is critical.

A very important feature is to help to reduce wear from static vibration known as false brinelling and from sliding motion due to axial thrust. These are the most prominent failure modes in Wind Turbine main bearings.

Advantages Of Tribol GR SW 460-1

  • Reduced downtime and maintenance costs because of reduced wear, rust and corrosion.
  • Reduced bearing failures on account of better wear control from axial thrust.
  • Reduced pitting risk due to low coefficient of friction
  • Reduced wear from static vibration (false brinelling)
  • Outstanding high and low temperature performance.
  • Extended service life with longer intervals between re-lubrication.
  • Reduced energy consumption due to low friction coefficient.
Typical Characteristics Of Tribol GR SW 460-1
Name Method Units Tribol GR SW 460-1
Color Visual - Yellow
Appearance Visual - Homogeneous
Thickner Type - - Lithium Complex
Base Oil Type - - Synthetic
Consistency ISO 2137/ ASTM D 217 NLGI Grade 1
Base Oil Viscosity @ 40 °C/104 °F ISO 3104/ ASTM D445 mm²/s 460
Base Oil Viscosity @ 100 °C/212 °F ISO 3104/ ASTM D445 mm²/s 53
Worked Penetration, 60 strokes @ 25ºC/77ºF ASTM D217 0.1 mm 310-340
Worked Penetration (100,000 strokes @ 25°C / 77°F) - change from 60 strokes ASTM D217 0.1 mm < 30
Dropping Point ISO 2176/ASTM D2265 °C/°F >250/>482
Roll Stability (24 h, 60 °C), units change ASTM D1831 0.1 mm 40
Four Ball Wear test - Wear Scar Diameter (40 kgf/75 °C, 60 minutes) ASTM D2266 mm 0.4
Four Ball Weld Load test - Weld Point ASTM D2596 kgf 500
Rust Test - EMCOR (1% NaCl solution) ISO 11007 modified Rating ≤0/1
Flow Pressure -40 °C DIN 51805 hPa 500
Oil Separation (168h @40°C) DIN 51817 % wt max 6
Oil Separation (24 h, RT) ASTM D1742 % wt loss ≤ 3
Water Wash-out (1 hr/79°C) ASTM D1264 % wt loss 5
Copper Corrosion (24 h, 120 °C) ASTM D 4048 Rating 1b
Low Temperature Starting Torque @ -40 °C ASTM D1478 Nm 0.3
Low Temperature Running Torque @ -40 °C ASTM D1478 Nm 0.07
Fretting wear resistance (SRV) (100 N/50 °C/0.3 mm/ 50 Hz/4 h, ball scar diameter) ASTM D7594 mm 0.33
FE9 Test (B/1500/6000-140) DIN 51821 - Pass, F50>200 h
FE8 Test (C/75/50-RT, 500 h) DIN 51819 MW50 mg 10

If you wish to buy Tribol GR SW 460-1 of Castrol from Mumbai, India then please email to or call / whatsapp +919870666888.

Tribol GR SW 460-1, Castrol in India
We can give you the best cost prices to buy Tribol GR SW 460-1compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

High Performance Grease For Wind Turbines Tribol GR SW 460-1, Castrol in India
We can also ship Tribol GR SW 460-1 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.

Lube Oil Company (Since 1976)
107, Madhu Industrial Estate,
Mograpada, Mogra Village Road,
Andheri East,
Mumbai (Bombay) – 400069.

Please email exact product name, brand name, quantity required, your company name, address and contact details. If you donot have product name then mention proper application in detail.

We are based in Mumbai and can ship to you by transport.

Email :

Sales Contact : Devang Mehta

Mobile : +91-9870 666 888 Click to Call

Landline : 022 4015 4015 Click to Call

Office Mobile : +91 8082 666 888 Click to Call

Click to Whatsapp Devang : +919870666888

Click to Whatsapp our Office : +918082666888

Lube Oil Company - Visiting Card
Lube Oil Company - Visiting Card