Tribol SW MWO 40 Castrol
Tribol SW MWO 40 :
Castrol Tribol SW MWO 20 Range (previously called Tribol MWO LS) way oils are used for the lubrication of machine tool slides and ways. Tribol SW MWO 20 and 40 are ISO Viscosity Grades 68 and 220, respectively. These unique way oils are intended for use where solid lubricants cannot be used for cosmetic or other reasons. Tribol SW MWO way oils offer excellent thin-film wear protection due to a proprietary blend of anti-wear, extreme pressure (EP) and friction- modifying agents which perform synergistically in combination. When subjected to the extreme pressure of contacting asperties these additives convert to low-shear compounds on working surfaces, lubricating much like solid-film lubricants. Because the additives in Tribol SW MWO way oils are fully dissolved but act like solid lubricants in service, the products are designated "LS" for "Liquid Solids." The high quality base oils in Tribol SW MWO way oils are selected for their ability to maintain strong film integrity even under great stress. Additional compounding with select polymers adds both adhesive and cohesive characteristics to these products. Tribol SW MWO way oils are not corrosive to ferrous or non-ferrous metals and rust and oxidation inhibiting characteristics are maximised to afford effective rust protection and long life of the oil. Tribol SW MWO way oils are "low phenol" products, typically containing less than 2 ppm of phenolic compounds.
Application Of Castrol Tribol SW MWO 40
Tribol SW MWO way oils are recommended where the use of lubricating solids may be restricted due to manufacturer's requirements, very fine filtration, or concerns about solids contaminating the manufacturing process. They are also suitable for lubricating many components of machine tools, including slides and ways, plain and antifriction bearings, translating screws, headstock gears, and some circulating systems.
Tribol SW MWO way oils are especially useful in applications where non-drip characteristics are desirable to reduce oil loss or control "fly-off" from cams, eccentrics, conveyors, press shaft bearings, and in worn and older machines with expanded clearances. Other important uses for Tribol SW MWO way oils include the lubrication of chains and wire ropes where good adhesion and tackiness are needed, particularly where there is the potential for heavy condensation or waterwash.
Tribol SW MWO way oils are not intended for use in hydraulic systems or some circulating systems that serve both ways and critical hydraulics.
Advantages Of Tribol SW MWO 40
- Tribol SW MWO way oils special formulation is most effective in the elimination of "stick-slip" and "chatter" on all ways, vertical and horizontal.
- The clear appearance and non-drip nature can reduce the soilage of production and housekeeping problems as well.
Typical Characteristics Of Tribol SW MWO 40
| Name | Method | Units | SW MWO 20 | SW MWO 40 |
|---|---|---|---|---|
| ISO Viscosity Grade | - | - | 68 | 220 |
| Density @ 15°C / 59°F | ISO 12185 / ASTM D4052 | kg/m³ | 900 | 900 |
| Kinematic Viscosity @ 40°C / 104°F | ISO 3104 / ASTM D445 | mm²/s | 69.5 | 217 |
| Kinematic Viscosity @ 100°C / 212°F | ISO 3104 / ASTM D445 | mm²/s | 8.2 | 16.8 |
| Viscosity Index | ISO 2909 / ASTM D2270 | - | 82 | 78 |
| Pour Point | ISO 3016 / ASTM D97 | °C/°F | 1.363636364 | 3.5 |
| Flash Point - open cup method | ISO 2592 / ASTM D92 | °C/°F | 190 / 374 | 220 / 428 |
| Rust test - distilled water (24 hrs) | ISO 7120 / ASTM D665A | - | Pass | Pass |
| Rust test - synthetic seawater (24 hrs) | ISO 7120 / ASTM D665B | - | Pass | Pass |
| Carbon residue - Conradson test | ISO 6615 / ASTM D189 / DIN 51551 | %wt | 0.05 | 0.06 |
| Timken OK Load test | ASTM D2782 | kg / lb | 27 / 60 | 27 / 60 |
| Four Ball Wear test - Wear Scar Diameter (40 kgf | ASTM D2266 | mm | 0.4 | 0.4 |
| / 75°C / 1200 rpm / 1 hr) | ||||
| Four Ball Weld Load test - Load Wear Index | ASTM D2783 | kgf | 55 | 57 |
| Four Ball Weld Load test - Weld Point | ASTM D2783 | kgf | 315 | 315 |
| Antiwear test - Falex Pin & V-Block | ASTM D 2670 | Teeth Wear (number) | 5 | 5 |
| Stick-slip ratio - Cincinatti Lamb test | Cincinatti Lamb test | Ratio | 0.73 | 0.73 |
If you wish to buy Tribol SW MWO 40 of Castrol from Mumbai, India then please email to sales@lubeoilcompany.com or call / whatsapp +919870666888.
Tribol SW MWO 40, Castrol in India
We can give you the best cost prices to buy Tribol SW MWO 40compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Slideway Oils Tribol SW MWO 40, Castrol in India
We can also ship Tribol SW MWO 40 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep, and Puducherry.