Turbo CC 32 Shell
Turbo CC 32 :
Shell Turbo Oils CC have been developed to meet the severe demands imposed by modern, heavy duty turbine applications, exceeding OEM specifications for both gas and steam turbines. A patented, metal free additive technology, ensures that these products offers substantially improved performance over conventional turbine oils. The unique combination of excellent oxidation and thermal stability, coupled with the resistance to formation of deposits and varnish, sludge control and surface properties make Shell Turbo Oils CC an excellent choice lubricant for emerging combined cycle turbine technology, as well as existing gas and steam turbine plants.
Performance, Features & Benefits Of Shell Turbo CC 32
- Superior oxidation and thermal stability
Modern combined cycle and stationary gas turbines
operating at high power outputs can be very stressful on the oxidation and thermal properties of the turbine oil.
Lubrication stability failure in this area can create operational problems, system deposits and the formation of varnish in critical areas. Shell Turbo Oils CC are especially designed to cope with these conditions. Their outstanding oxidation and thermal stability, coupled with the resistance to form deposits and varnish reduces the possibility of unplanned outages. The result is extended oil life, less
maintenance and less downtime. - Rapid air release and high resistance to foaming
High oil flows contribute to the possibility of entrapped air,
which can lead to pump cavitation, premature oil oxidation and excessive wear. Shell Turbo Oils CC exhibit excellent surface properties with minimal foam formation and rapid air-release, which minimises air entrapment, reducing these effects of high oil flows to a minimum. - Excellent water-shedding properties
Water contamination is commonplace in steam turbines,
causing corrosion and affecting bearing lubrication. Because of Shell Turbo Oils CC outstanding demulsibility water can be drained easily from the lubrication system, protecting the installation against corrosion and premature wear. - Good load carrying capacity
An ashless, non-zinc anti-wear system reduces excessive gear tooth and turbine component wear making it suitable for use in turbines with highly loaded gears. Minimising downtime and maintenance costs.
Main Applications - Power generation combined cycle turbines.
- Industrial steam turbines.
- Industrial gas turbines.
Specifications, Approvals & Recommendations Of Shell Turbo CC 32
- Siemens TLV 9013 04 & TLV 9013 05
- Alstom HTGD 90117 V 0001 AA
- General Electric GEK 28143b, GEK 32568h, GEK 46506E,
GEK 101941A and GEK 107395a - Siemens-Westinghouse 21 T0591 & 55125Z3
- Siemens/Mannesmann Demag 800 037 98 TD 32 / TD 46
- Solar ES 9-224Y Class II
- DIN 51515 Part 1 L-TD & Part 2 L-TG
- GEC Alstom NBA P50001A
- S K 2213:2006 Type 2
- ASTM D 4304-06a Type I, II & III
- Skoda Technical Properties Tp 0010P/97 use in steam
turbines.
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk
Typical Physical Characteristics Of Shell Turbo CC 32
| Properties | Method | Shell Turbo Oil CC 32 | |
|---|---|---|---|
| Kinematic Viscosity | @400C cSt | ASTM D445 | 32 |
| Kinematic Viscosity | @1000C cSt | ASTM D445 | 5.45 |
| Viscosity Index | ASTM D2270 | 105 | |
| Colour | ASTM D1500 | L 1.0 | |
| Pour Point | 0C | ASTM D97 | -12 |
| Flash Point (COC) | 0C | ASTM D92 | 218 |
| Total Acid Number | mg KOH/g | ASTM D974 | 0.16 |
| Foaming, Sequence I | m/l/ml | 10/Nil | |
| Foaming, Sequence II | m/l/ml | 20/Nil | |
| Foaming, Sequence III | m/l/ml | 10/Nil | |
| Air Release | minutes | ASTM D3427 | 4 |
| Water Demulsibility | minutes | ASTM D1401 | 15 |
| Rust Control, after water washing | ASTM D665B | Pass | |
| Load Carrying Capacity - FZG - Load Stage Fail | minutes | DIN 51354 | 9 |
| Oxidation Control Test - TOST Life | hours minimum | Modified ASTM D943 | 10,000 |
| Oxidation Control Test - RPVOT | minutes minimum | ASTM D2272 | 1,300 |
| Oxidation Control Test - FTM-791b-5308 - Tan Increase | mg KOH/g | 0.6 | |
| Oxidation Control Test - FTM-791b-5308 - Viscosity Increase | @400C % | 8 | |
| Oxidation Control Test - FTM-791b-5308 - Sludge Formation | mg | 98 |
If you wish to buy Turbo CC 32 of Shell from Mumbai, India then please email to sales@lubeoilcompany.com or call/whatsapp +919870666888.
Turbo CC 32, Shell in India
We can give you the best cost prices to buy Turbo CC 32 compared to all dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.
Premium Quality Industrial Gas, Steam & Combined Cycle Turbine Oils Turbo CC 32, Shell in India
We can also ship Turbo CC 32 to all these states of India Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Chandigarh, Dadra and Nagar Haveli and Daman and Diu, Delhi, Jammu and Kashmir, Ladakh, Lakshadweep and Puducherry.